Publication Department of Machines Design

2024

PETRŮ, M. , and RAHIMIAN KOLOOR, S. S. 3D Printing and Implementation of Engineered Cementitious Composites - A Review CASE STUDIES IN CONSTRUCTION MATERIALS London: Elsevier, 2024, vol. 21, issue 2024. P. neuvedeny (28 stranky). ISSN: 2214-5095. https://www.sciencedirect.com/science/article/pii/S2214509524006132?pes=vor

AMOR, N. et al. Advances in heat exchangers for heat and mass transfer: a review The Journal of The Textile Institute Taylor & Francis, 2024 P. neuvedeny (15 stran). ISSN: 0040-5000. https://www.tandfonline.com/doi/full/10.1080/00405000.2024.2311226?scroll=top&needAccess=true

PETRŮ, M. et al. Advances in silicon nitride ceramic biomaterials for dental applications – A review Journal of Materials Research and Technology Amsterdam: Elsevier, 2024, vol. 28, issue EARLY ACCESS. P. 2778 – 2791. ISSN: 2238-7854. https://www.sciencedirect.com/science/article/pii/S2238785423032507?pes=vor

PETRŮ, M. , and RAHIMIAN KOLOOR, S. S. Advances in silicon nitride ceramic biomaterials for dental applications – A review Journal of Materials Research and Technology Elsevier, 2024, vol. 28, issue 2024. P. neuvedeny (14 stran). ISSN: 2238-7854. https://www.sciencedirect.com/science/article/pii/S2238785423032507?pes=vor

MAHMOOD, A. et al. Aging Behaviour Assessment of Cellulosic Fibres in Alkaline Media: A Green Technology Approach in Construction Materials Journal of building engineering Amsterdam: Elsevier, 2024, vol. 6, issue 6. P. 1 – 45. ISSN: 2352-7102. https://www.sciencedirect.com/science/article/pii/S2352710224012531

RAHIMIAN KOLOOR, S. S. Analytical investigation of asymmetric forced vibration behavior of functionally graded porous plates with structural damping MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES PHILADELPHIA: TAYLOR & FRANCIS INC, 2024, vol. 52, issue 4. P. 2749 – 2774. ISSN: 1539-7734. https://www.tandfonline.com/doi/full/10.1080/15397734.2023.2189985

AHMAD, S. et al. Cumulative fretting fatigue damage model for steel wire ropes Fatigue and Fracture of Engineering Materials and Structures Hoboken: John Wiley and Sons Inc, 2024, vol. 47, issue 5. P. 21. ISSN: 8756-758X. https://onlinelibrary.wiley.com/doi/epdf/10.1111/ffe.14264

MUSADDAQ, A., SHAHID, M., PETRŮ, M. , and MAŠÍN, I. Design and development of textile-based wearable sensors for real-time biomedical monitoring; a review The Journal of The Textile Institute, 2024 P. neuvedeny (16 stran). ISSN: 1754-2340. https://www.tandfonline.com/doi/pdf/10.1080/00405000.2024.2318500

AMOR, N., PETRŮ, M. , and NOMAN, M. T. Design and optimization of machinability of ZnO embedded-glass fiber reinforced polymer composites with a modified white shark optimizer Expert Systems with Applications Oxford: Elsevier, 2024, vol. 2024, issue 3. P. 1 – 12. ISSN: 0957-4174. https://www.sciencedirect.com/science/article/pii/S0957417423019760?pes=vor

AMOR, N. et al. Design and optimization of machinability of ZnO embedded-glass fiber reinforced polymer composites with a modified white shark optimizer Expert Systems with Applications AMSTERDAM: Elsevier, 2024, vol. 237, issue MAR 1. P. neuvedeny (12 stran). ISSN: 0957-4174. https://www.sciencedirect.com/science/article/pii/S0957417423019760

MUSADDAQ, A. et al. Efficient fog collector with superhydrophobic coated surface Journal of the Textile Institute Oxon: Taylor & Francis, 2024, vol. 115, issue 7. P. 1048 – 1058. ISSN: 0040-5000. https://www.tandfonline.com/doi/full/10.1080/00405000.2023.2207760

PETRŮ, M. , and NOMAN, M. T. Enhancing dynamic viscoelastic performance of flax fiber/fly ash hollow cenosphere-reinforced composites coated by in situ fabrication of ultrasonically synthesized nanotitanium dioxide Journal of Applied Polymer Science WILEY, 2024, vol. 2024, issue 6. P. 1 – 14. ISSN: 0021-8995. https://onlinelibrary.wiley.com/doi/10.1002/app.55843

AMOR, N. et al. Machining performance of TiO2 embedded-glass fiber reinforced composites with snake optimizer MEASUREMENT London: Elsevier, 2024, vol. 227, issue 3. P. 1 – 16. ISSN: 0263-2241. https://www.sciencedirect.com/science/article/pii/S0263224124001374?via%3Dihub

MUSADDAQ, A., PETRŮ, M., HES, L. , and MAŠÍN, I. Positive impacts of plasma treatment on comfort properties of textile blends Advances in Plasma Treatment of Textile Surfaces 1. ed. Oxford: Elsevier, 2024 P. 367 – 385. ISBN: 978-0-443-19079-7.https://www.sciencedirect.com/book/9780443190797/advances-in-plasma-treatment-of-textile-surfaces

LE VAN, S. , and SETLAK, K. Revolutionizing Construction Safety with Geopolymer Composites: Unveiling Advanced Techniques in Manufacturing Sandwich Steel Structures Using Formwork-Free Spray Technology Coatings {ISSN: 2079-6412} Basel: MDPI, 2024, vol. 14, issue 1. P. neuvedeny (17 stran). ISSN: 2079-6412. https://www.mdpi.com/2079-6412/14/1/146

2023

ALI, A. et al. A comparative performance of antibacterial effectiveness of copper and silver coated textiles Journal of Industrial Textiles SAGE PUBLICATIONS INC, 2023, vol. 53, issue AUG. P. neuvedeny (10 stran). ISSN: 1528-0837. https://journals.sagepub.com/doi/10.1177/15280837221134990

AMOR, N. et al. A review on computational intelligence methods for modeling of light weight composite materials Applied Soft Computing AMSTERDAM: Elsevier, 2023, vol. 147, issue 11. P. neuvedeny (21 stranky). ISSN: 1568-4946. https://www.sciencedirect.com/science/article/pii/S156849462300830X

MANSOR, M. A., AHMAD, M. R., PETRŮ, M. , and RAHIMIAN KOLOOR, S. S. An impedance flow cytometry with integrated dual microneedle for electrical properties characterization of single cell Artificial Cells, Nanomedicine, and Biotechnology OXON: Taylor and Francis, 2023, vol. 51, issue 1. P. 371 – 383. ISSN: 2169-1401. https://www.tandfonline.com/doi/full/10.1080/21691401.2023.2239274

MOHAMMADI, H. et al. An insight from nature: Honeycomb pattern in advanced structural design for impact energy absorption Journal of Materials Research and Technology AMSTERDAM: Elsevier, 2023, vol. 22, issue 1-2. P. 2862 – 2887. ISSN: 2238-7854. https://www.sciencedirect.com/science/article/pii/S2238785422019524?via=ihub

ALAVI, S. K., AYATOLLAHI, M. R., YAHYA, M. Y. , and RAHIMIAN KOLOOR, S. S. Analytical investigation of asymmetric forced vibration behavior of functionally graded porous plates with structural damping MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES PHILADELPHIA: Taylor and Francis, 2023 P. neuvedeny (26 stranky). ISSN: 1539-7734. https://www.tandfonline.com/doi/full/10.1080/15397734.2023.2189985

ALI, A., RAHIMIAN KOLOOR, S. S., ALSHEHRI, A. H. , and AROCKIARAJAN, A. Carbon nanotube characteristics and enhancement effects on the mechanical features of polymer-based materials and structures – A review Journal of Materials Research and Technology Amsterdam: Elsevier, 2023, vol. 24, issue 5-6. P. 6495 – 6521. ISSN: 2238-7854. https://www.sciencedirect.com/science/article/pii/S2238785423007652?pes=vor

ŠEVČÍK, L. , and RYVOLOVÁ, M. Design of Load Carrier Composite Reinforcement of Zero Generation of an Electric Car Frame Proceedings of the 61st International Conference of Machine Design Departments, 2023 P. neuvedeny (7 stran). ISBN: 978-94-6463-182-1, ISSN: 2589-4943. https://www.atlantis-press.com/proceedings/icmd-20/125987569

MAHMOOD, A. et al. Energy efficient industrial and textile waste for the fabrication of cementitious composites: a review The Journal of The Textile Institute ABINGDON: Taylor & Francis, 2023 P. neuvedeny (17 stran). ISSN: 0040-5000. https://www.tandfonline.com/doi/full/10.1080/00405000.2023.2220515

USAMA, I. et al. Finite element analysis of car frame frontal crash using lightweight materials Journal of Engineering Research Khaldiya: Academic Publication Council, 2023, vol. 11, issue 1. P. neuvedeny (9 stran). ISSN: 2307-1877. https://www.researchgate.net/publication/367530850_Finite_element_analysis_of_car_frame_frontal_crash_using_lightweight_materials

MAŠÍN, I., JANDURA, P., SLÁMOVÁ, Z. , and SOJÁK, P. Forma pro tvarování skleněných bižuterních komponent z recyklátu [utility model] Enlisted at 20230925 as No. 37336.

LAZAROV, A. et al. Funkční vzorek jednoduchého vakuového efektoru s jednou přísavkou a customizovaným dílem vyrobeným 3D tiskem [funkční vzorek]

MAŠÍN, I. et al. Funkční vzorek kompletu skleněné bižuterie pro cirkulární ekonomiku se SMART komponentou [funkční vzorek]

SRB, P., VOSÁHLO, J. , and MAZAČ, M. Funkční vzorek měřicího přípravku pro kabelové lávky a žlaby. [funkční vzorek]

MAŠÍN, I., JANDURA, P., SLÁMOVÁ, Z. , and SOJÁK, P. Funkční vzorek skleněné perly obsahující recyklát z kompozitního materiálu [funkční vzorek]

AKRAM, W. et al. Hydroxyapatite Coating for Control Degradation and Parametric Optimization of Pure Magnesium: An Electrophoretic Deposition Technique for Biodegradable Implants Journal of Materials Research and Technology Amsterdam: Elsevier, 2023, vol. 26, issue SEP. P. neuvedeny (26 stranky). ISSN: 2238-7854. https://www.sciencedirect.com/science/article/pii/S2238785423018379

MAŠÍN, I. , and JANDURA, P. IoT for Industry 4.0: performance monitoring in manual production Advanced Signal Processing for Industry 4.0, Volume 2 1. ed. Bristol, UK: IOP Publishing Ltd, 2023 P. 1 – 29. ISBN: 978-0-7503-5656-5.https://iopscience.iop.org/book/edit/978-0-7503-5658-9

BAHRAMI, B., MEHRABAN, M. R., RAHIMIAN KOLOOR, S. S. , and AYATOLLAHI, M. R. Non-local and local criteria based on the extended finite element method (XFEM) for fracture simulation of anisotropic 3D-printed polymeric components RAPID PROTOTYPING JOURNAL YORKSHIRE: Emerald, 2023, vol. 29, issue 8. P. 1742 – 1756. ISSN: 1355-2546. https://www.emerald.com/insight/content/doi/10.1108/RPJ-12-2022-0431/full/html

ALAVI, S. K., AYATOLLAHI, M. R., YAHYA, M. Y. , and RAHIMIAN KOLOOR, S. S. On the asymmetric dynamic response of viscoelastic sector plate made of FG polymer foam THIN-WALLED STRUCTURES OXFORD: Elsevier, 2023, vol. 187, issue 7. P. neuvedeny (15 stran). ISSN: 0263-8231. https://www.sciencedirect.com/science/article/pii/S0263823123002033?via=ihub

NEETHU, S. et al. Porous hematite embedded C and Fe codoped graphitic carbon nitride for electrochemical detection of pineal gland hormone melatonin Materials Today Chemistry OXFORD: Elsevier, 2023, vol. 29, issue 4. P. neuvedeny (12 stran). ISSN: 2468-5194. https://www.sciencedirect.com/science/article/pii/S2468519423000332?via=ihub

GHANDVAR, H. et al. Role of YSZ Particles on Microstructural, Wear, and Corrosion Behaviour of Al-15%Mg2Si Hybrid Composite for Marine Applications Journal of Marine Science and Engineering MDPI, 2023, vol. 11, issue 5. P. neuvedeny (18 stran). ISSN: 2077-1312. https://www.mdpi.com/2077-1312/11/5/1050

JANDURA, P., SRB, P. , and VOSÁHLO, J. Stavitelná nosná rámová konstrukce pro 3D scanner - funkční vzorek [funkční vzorek]

SIDDIQUE, H. F. et al. Study on tensile properties of compression SOCKS ankle cut-strips at practical extension Journal of Industrial Textiles THOUSAND OAKS: SAGE PUBLICATIONS INC, 2023, vol. 53, issue APR. P. neuvedeny (23 stranky). ISSN: 1528-0837. https://journals.sagepub.com/doi/full/10.1177/15280837231170305

AZEMATI, A. et al. Thermal evaluation of a room coated by thin urethane nanocomposite layer coating for energy-saving efficiency in building applications Case Studies in Thermal Engineering AMSTERDAM: Elsevier, 2023, vol. 43, issue 3. P. neuvedeny (11 stran). ISSN: 2214-157X. https://www.sciencedirect.com/science/article/pii/S2214157X2200925X?pes=vor

ASGHARI, Y., MOHAMMADYAN-YASOUJ, S. E. , and RAHIMIAN KOLOOR, S. S. Utilization of metakaolin on the properties of self-consolidating concrete: A review Construction and Building Materials Londýn: Elsevier, 2023, vol. 389, issue 7. P. neuvedeny (24 stranky). ISSN: 0950-0618. https://www.sciencedirect.com/science/article/pii/S0950061823013181?via=ihub

ŠEVČÍK, L., SRB, P., TŮMA, P. , and VOSÁHLO, J. Zařízení na měření celistvosti pryžo-kordových vulkanizovaných profilů [funkční vzorek]

2022

PETRŮ, M. , and BEHERA, P. K. 3D Woven Textile Structural Polymer Composites: Effect of Resin Processing Parameters on Mechanical Performance Polymers MDPI, 2022, vol. 14, issue 6. P. neuvedeny (25 stranky). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/14/6/1134

WANG, Y. et al. A facile approach to develop multifunctional cotton fabrics with hydrophobic, self-cleaning and UV protection properties using ZnO particles and fluorocarbon Journal of the Textile Institute ABINGDON: Taylor & Francis, 2022, vol. 113, issue 10. P. 2238 – 2248. ISSN: 0040-5000. https://www.tandfonline.com/doi/full/10.1080/00405000.2021.1975905

MOEZZI, R. , and RAHIMIAN KOLOOR, S. S. A Numerical Study of the effect of Bolt Thread Geometry on the Load Distribution of Continuous Threads Journal of Engineering Research University of Kuwait, 2022, vol. 10, issue 2 B. P. 158 – 173. ISSN: 2307-1877. https://kuwaitjournals.org/jer/index.php/JER/article/view/9785

BALRAM, D. et al. A sensitive and economical electrochemical platform for detection of food additive tert-butylhydroquinone based on porous Co3O4 nanorods embellished chemically oxidized carbon black FOOD CONTROL ELSEVIER SCI LTD, 2022, vol. 136, issue JUN. P. neuvedeny (11 stran). ISSN: 0956-7135. https://www.sciencedirect.com/science/article/pii/S0956713522000378?via=ihub

YANG, T. et al. Acoustical Evaluation and Comparative Study of Maple Leaves and Coir and Polyester Fibers Journal of Natural Fibers PHILADELPHIA: Taylor & Francis, 2022, vol. 19, issue 15. P. 10813 – 10818. ISSN: 1544-0478. https://www.tandfonline.com/doi/full/10.1080/15440478.2021.2002770

YANG, T. et al. AFDeter: A MATLAB-based tool for simple and rapid determination of the structural parameters and the airflow-related properties of fibrous materials SOFTWAREX Elsevier, 2022, vol. 20, issue 12. P. neuvedeny (6 stran). ISSN: 2352-7110. https://www.sciencedirect.com/science/article/pii/S2352711022001315?pes=vor

MOHAMMADI, H. et al. An insight from nature: honeycomb pattern in advanced structural design for impact energy absorption BIOORGANIC CHEMISTRY ACADEMIC PRESS INC ELSEVIER SCIENCE, 2022, vol. 123, issue JUN. P. 2862 – 2887. ISSN: 0045-2068. https://www.sciencedirect.com/science/article/pii/S2238785422019524?via=ihub

BALRAM, D. et al. Bi-functional renewable biopolymer wrapped CNFs/Ag doped spinel cobalt oxide as a sensitive platform for highly toxic nitroaromatic compound detection and degradation Chemosphere PERGAMON-ELSEVIER SCIENCE LTD, 2022, vol. 291, issue 2. P. neuvedeny (12 stran). ISSN: 0045-6535. https://www.sciencedirect.com/science/article/pii/S0045653521034706?via=ihub

AMOR, N., NOMAN, M. T., PETRŮ, M. , and NEETHU, S. Comfort evaluation of ZnO coated fabrics by artificial neural network assisted with golden eagle optimizer model Scientific Reports NATURE PORTFOLIO, 2022, vol. 12, issue 1. P. neuvedeny (16 stran). ISSN: 2045-2322. https://www.nature.com/articles/s41598-022-10406-6.pdf

DENG, M. et al. Construction of Novel Electro-Fenton Systems by Magnetically Decorating Zero-Valent Iron onto RuO2-IrO2/Ti Electrode for Highly Efficient Pharmaceutical Wastewater Treatment Water MDPI, 2022, vol. 14, issue 7. P. neuvedeny (19 stran). ISSN: 2073-4441. https://www.mdpi.com/2073-4441/14/7/1044

NEJAD, A. F. et al. Crashworthiness Assessment of Carbon/Glass Epoxy Hybrid Composite Tubes Subjected to Axial Load Polymers MDPI, 2022, vol. 14, issue 19. P. neuvedeny (15 stran). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/14/19/4083

KARIMZADEH, A. et al. Damage characterization of dental nanocomposite adhesive in orthodontic treatment applications INTERNATIONAL JOURNAL OF DAMAGE MECHANICS London: SAGE, 2022, vol. 31, issue 9. P. 1299 – 1319. ISSN: 1056-7895. https://journals.sagepub.com/doi/10.1177/10567895221088027

NEJAD, A. F. et al. Design of a novel creep testing machine to investigate the creep life history of austenitic steel foil at elevated temperature FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES WILEY, 2022, vol. 45, issue 9. P. 2563 – 2575. ISSN: 8756-758X. https://onlinelibrary.wiley.com/doi/10.1111/ffe.13769

YANG, T. et al. Determination of the permeability coefficient and airflow resistivity of nonwoven materials Textile Research Journal London: Sage Publications, 2022, vol. 92, issue 1-2. P. 126 – 142. ISSN: 0040-5175. https://journals.sagepub.com/doi/full/10.1177/00405175211029212

ALI, A. et al. Development of silver plated electrically conductive elastomers embedded with carbon black particles obtained from Kevlar waste source Polymer Testing Oxford: Elsevier, 2022, vol. 116, issue 12. P. neuvedeny (13 stran). ISSN: 0142-9418. https://www.sciencedirect.com/science/article/pii/S0142941822003142?pes=vor

PETRŮ, M. , and RAHIMIAN KOLOOR, S. S. Displacement rate effects on mixed-mode I/II delamination of laminated carbon/epoxy composites Polymer Testing Elsevier, 2022, vol. 108, issue 4. P. neuvedeny (11 stran). ISSN: 0142-9418. https://www.sciencedirect.com/science/article/pii/S014294182200040X

LOW, K. O. et al. Displacement rate effects on mixed-mode I/II delamination of laminated carbon/epoxy composites Polymer Testing Elsevier, 2022, vol. 108, issue 4. P. neuvedeny (11 stran). ISSN: 0142-9418. https://www.sciencedirect.com/science/article/pii/S014294182200040X?via=ihub

ZAIB, M. A. et al. Effect of Blade Diameter on the Performance of Horizontal-Axis Ocean Current Turbine Energies MDPI, 2022, vol. 15, issue 15. P. neuvedeny (13 stran). ISSN: 1996-1073. https://www.mdpi.com/1996-1073/15/15/5323

WANG, S. et al. Enhanced Methylene Blue Adsorption by Cu-BTC Metal-Organic Frameworks with Engineered Particle Size Using Surfactant Modulators Water MDPI, 2022, vol. 14, issue 12. P. neuvedeny (15 stran). ISSN: 2073-4441. https://www.mdpi.com/2073-4441/14/12/1864

YANG, T. et al. Experimental and Modelling Studies on Thermal Insulation and Sound Absorption Properties of Cross-Laid Nonwoven Fabrics Autex Research Journal WARSAW: SCIENDO, 2022, vol. 22, issue 3. P. 264 – 271. ISSN: 1470-9589. https://sciendo.com/article/10.2478/aut-2021-0012

HASHMI, M. H., RAHIMIAN KOLOOR, S. S., ABDUL-HAMID, M. F. , and TAMIN, M. N. Exploiting fractal features to determine fatigue crack growth rates of metallic materials ENGINEERING FRACTURE MECHANICS PERGAMON-ELSEVIER SCIENCE LTD, 2022, vol. 270, issue JUL. P. neuvedeny (15 stran). ISSN: 0013-7944. https://www.sciencedirect.com/science/article/pii/S0013794422003228?via=ihub

SHAH, I. A. et al. Finite Element Analysis of the Ballistic Impact on Auxetic Sandwich Composite Human Body Armor Materials MDPI, 2022, vol. 15, issue 6. P. neuvedeny (16 stran). ISSN: 1996-1944. https://www.mdpi.com/1996-1944/15/6/2064

HASHMI, M. H., RAHIMIAN KOLOOR, S. S., ABDUL-HAMID, M. F. , and TAMIN, M. N. Fractal Analysis for Fatigue Crack Growth Rate Response of Engineering Structures with Complex Geometry FRACTAL AND FRACTIONAL MDPI, 2022, vol. 6, issue 11. P. neuvedeny (12 stran). ISSN: 2504-3110. https://www.mdpi.com/2504-3110/6/11/635

NEETHU, S. et al. Functionalization of CNFs surface with beta-cyclodextrin and decoration of hematite nanoparticles for detection and degradation of toxic fungicide carbendazim Applied Surface Science ELSEVIER, 2022, vol. 586, issue JUN. P. neuvedeny (12 stran). ISSN: 0169-4332. https://www.sciencedirect.com/science/article/pii/S0169433222002483?via=ihub

SRB, P., MAZAČ, M., SIERATOVSKI, J. , and MAŠÍN, I. Funkční vzorek etiketovací jednotky pro SMART packaging [funkční vzorek]

PETRŮ, M. et al. Funkční vzorek kompozitního rámu modulární elektromobilní platformy [funkční vzorek]

ZHANG, L. et al. High Performance Flexible Strain Sensors Based On Silver Nanowires/thermoplastic Polyurethane Composites for Wearable Devices Applied Composite Materials Springer, 2022, vol. 29, issue 4. P. 1621–1636. ISSN: 0929-189X. https://link.springer.com/article/10.1007/s10443-022-10029-0

MILITKÝ, J. et al. Highly stretchable durable electro-thermal conductive yarns made by deposition of carbon nanotubes Journal of the Textile Institute 1. ed. OXON: Taylor and Francis, 2022, vol. 113, issue 1. P. 80 – 89. ISSN: 0040-5000. https://www.tandfonline.com/doi/full/10.1080/00405000.2020.1863569?needAccess=true

MAŠÍN, I., MARTINEC, T., BUCHTA, J. , and MALENA, V. Inteligentní plynový ohřívač vzduchu [funkční vzorek]

PETRÍK, S. et al. Kompozitní struktura (demonstrátor) se zabudovanými vodivými kompozitními páskami (VKP) [funkční vzorek]

KUMAR, S. et al. Mechanical and Morphological Characterizations of Laminated Object Manufactured 3D Printed Biodegradable Poly(lactic)acid with Various Physical Configurations Journal of Marine Science and Engineering MDPI, 2022, vol. 10, issue 12. P. neuvedeny (23 stranky). ISSN: 2077-1312. https://www.mdpi.com/2077-1312/10/12/1954

PETRŮ, M. et al. Modulární platforma pro autonomní podvozky specializovaných elektrovozidel pro dopravu nákladu a zařízení - Generace 0 [funkční vzorek]

VOŽENÍLEK, R. et al. Modulární platforma pro autonomní podvozky specializovaných elektrovozidel pro dopravu nákladu a zařízení - Generace 1 [funkční vzorek]

NEETHU, S. et al. Nanomolar detection of food additive tert-butylhydroquinone in edible oils based on novel ternary metal oxide embedded beta-cyclodextrin functionalized carbon black FOOD CHEMISTRY ELSEVIER SCI LTD, 2022, vol. 377, issue MAY. P. neuvedeny (10 stran). ISSN: 0308-8146. https://www.sciencedirect.com/science/article/pii/S0308814621028739?via=ihub

ALAVI, S. K., AYATOLLAHI, M. R., PETRŮ, M. , and RAHIMIAN KOLOOR, S. S. On the dynamic response of viscoelastic functionally graded porous plates under various hybrid loadings OCEAN ENGINEERING Oxford: Elsevier, 2022, vol. 264, issue 11. P. neuvedeny (13 stran). ISSN: 0029-8018. https://www.sciencedirect.com/science/article/pii/S0029801822018248?via=ihub

NOROUZTABAR, R. et al. On the Performance of a Modified Triple Stack Blade Savonius Wind Turbine as a Function of Geometrical Parameters Sustainability MDPI, 2022, vol. 14, issue 16. P. neuvedeny (26 stranky). ISSN: 2071-1050. https://www.mdpi.com/2071-1050/14/16/9816

AHMED, S. et al. Optimization of Process Parameters in Friction Stir Welding of Aluminum 5451 in Marine Applications Journal of Marine Science and Engineering MDPI, 2022, vol. 10, issue 10. P. neuvedeny (13 stran). ISSN: 2077-1312. https://www.mdpi.com/2077-1312/10/10/1539

MARTINEC, T. et al. Plynový ohřívač vzduchu a topný systém obsahující alespoň jeden takový plynový ohřívač vzduchu [utility model] Enlisted at 20220607 as No. 36118. https://isdv.upv.cz/doc/FullFiles/UtilityModels/FullDocuments/FDUM0036/uv036118.pdf

REMADEVI JAYAN, V. et al. Prediction of internal geometry and tensile behavior of 3D woven solid structures by mathematical coding Journal of Industrial Textiles SAGE PUBLICATIONS INC, 2022, vol. 51, issue 4. P. 7034S – 7055S. ISSN: 1528-0837. https://journals.sagepub.com/doi/abs/10.1177/15280837211001348

ISRAR, H. A. et al. Preliminary Structural Design of Coreless Spoiler by Topological Optimization Processes MDPI, 2022, vol. 10, issue 10. P. neuvedeny (14 stran). ISSN: 2227-9717. https://www.mdpi.com/2227-9717/10/10/2076

TAN, X. et al. Preparation and Characterization of Corn Husk Nanocellulose Coating on Electrospun Polyamide 6 Alexandria Engineering Journal Amsterdam: ELSEVIER, 2022, vol. 61, issue 6. P. 4529 – 4540. ISSN: 1110-0168. https://doi.org/10.1016/j.aej.2021.10.011

XIONG, X. et al. Preparation and Characterization of Electrosprayed Aerogel/Polytetrafluoroethylene Microporous Materials Polymers Basel: MDPI, 2022, vol. 14, issue 1. P. 1 – 14. ISSN: 2073-4360. https://www.mdpi.com/2073-4360/14/1/48

FARID, A. A., SHEN, F. S., RAHIMIAN KOLOOR, S. S. , and PETRŮ, M. Quality evaluation of aluminum-AA6061 truncated cone deformed by single point incremental forming Journal of the Brazilian Society of Mechanical Sciences and Engineering Springer, 2022, vol. 44, issue 9. P. neuvedeny (9 stran). ISSN: 1678-5878. https://link.springer.com/content/pdf/10.1007/s40430-022-03730-5.pdf

NEETHU, S. et al. Silver doped dodecahedral metal organic framework anchored RGO nanosheets for nanomolar quantification of priority toxic pollutant in aquatic environment Journal of Alloys and Compounds ELSEVIER SCIENCE SA, 2022, vol. 922, issue NOV. P. neuvedeny (12 stran). ISSN: 0925-8388. https://www.sciencedirect.com/science/article/pii/S0925838822025713?via=ihub

YANG, T. et al. Simple determination of key structural parameters for fibrous materials enabled by Ergun-Type and Kozeny-type equations Polymer Testing Elsevier, 2022, vol. 108, issue 4. P. neuvedeny (12 stran). ISSN: 0142-9418. https://www.sciencedirect.com/science/article/pii/S0142941822000423

YANG, T. et al. Sound Absorption Properties and Accuracy of Prediction Models on Natural Fiber Based Nonwoven Materials Journal of Natural Fibers PHILADELPHIA: Taylor & Francis, 2022, vol. 19, issue 15. P. 10588 – 10600. ISSN: 1544-0478. https://www.tandfonline.com/doi/full/10.1080/15440478.2021.2002755

RAHIMIAN KOLOOR, S. S., PETRŮ, M., ALAVI, S. K. , and AYATOLLAHI, M. R. Study on fundamental damped frequency parameters of plates made of FG porous material: a close-form solution Waves in Random and Complex Media Taylor and Francis, 2022, vol. 32, issue 6. P. neuvedeny (27 stranky). ISSN: 1745-5030. https://www.tandfonline.com/doi/full/10.1080/17455030.2022.2139010?journalCode=twrm20

RAHIMIAN KOLOOR, S. S. et al. Supersonic flutter behavior of a polymeric truncated conical shell reinforced with agglomerated CNTs Waves in Random and Complex Media TAYLOR & FRANCIS LTD, 2022 P. neuvedeny (25 stranky). ISSN: 1745-5030. https://www.tandfonline.com/doi/full/10.1080/17455030.2022.2082581?scroll=top&needAccess=true&role=tab

MUSADDAQ, A. et al. Surface wettability of vertical harps for fog collection SURFACES AND INTERFACES Elsevier, 2022, vol. 30, issue JUN. P. 1 – 10. ISSN: 2468-0230. https://www.sciencedirect.com/science/article/pii/S2468023022001237

NOMAN, M. T., AMOR, N. , and PETRŮ, M. Synthesis and applications of ZnO nanostructures (ZONSs): a review CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES 1. ed. PHILADELPHIA: Taylor and Francis, 2022, vol. 47, issue 2. P. 99 – 141. ISSN: 1040-8436. https://www.tandfonline.com/doi/abs/10.1080/10408436.2021.1886041?journalCode=bsms20

LEDERER, T. et al. Textilní nosič biomasy [utility model] Enlisted at 20220215 as No. 35793. https://isdv.upv.cz/doc/FullFiles/UtilityModels/FullDocuments/FDUM0035/uv035793.pdf

RYVOLOVÁ, M. , and MAZAČ, M. The composite component with self-detection of damage EAN 2022 - 60th Annual Conference on Experimental Stress Analysis - Book of Extended Abstracts Praha: CTU Prague, 2022 P. 90 – 92. ISBN: 978-80-01-07010-9. https://www.ean60.cz/

BALRAM, D. et al. Ultrasensitive detection of food colorant sunset yellow using nickel nanoparticles promoted lettuce-like spinel Co3O4 anchored GO nanosheets Food and Chemical Toxicology PERGAMON-ELSEVIER SCIENCE LTD, 2022, vol. 159, issue JAN. P. neuvedeny (8 stran). ISSN: 0278-6915. https://www.sciencedirect.com/science/article/pii/S0278691521007584?via=ihub

HU, Q. et al. Ultrastable MOF-based foams for versatile applications NANO RESEARCH TSINGHUA UNIV PRESS, 2022, vol. 15, issue 4. P. 2961 – 2970. ISSN: 1998-0124. https://link.springer.com/article/10.1007/s12274-021-3918-6

HU, Q. et al. Unraveling timescale-dependent Fe-MOFs crystal evolution for catalytic ozonation reactivity modulation Journal of Hazardous Materials ELSEVIER, 2022, vol. 431, issue JUN. P. neuvedeny (11 stran). ISSN: 0304-3894. https://reader.elsevier.com/reader/sd/pii/S0304389422003636?token=324BF39431088D732F460685FD185085BC1AFC476C3EBC5D95EE937899242E780AB2E9E4AB738B5EAB06FAA7E9FECE86&originRegion=eu-west-1&originCreation=20230209093818

AMOR, N., NOMAN, M. T. , and PETRŮ, M. Use of an Artificial Neural Network for Tensile Strength Prediction of Nano Titanium Dioxide Coated Cotton Polymers MDPI, 2022, vol. 14, issue 5. P. neuvedeny (11 stran). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/14/5/937

MAHMOOD, A. et al. Use of industrial by-products as replacement of cement for the fabrication of concrete - an approach towards sustainable structures Selected Topics in Fibrous Material Science 1. ed. Liberec: Technical University of Liberec, 2022 P. 12 – 31. ISBN: 978-80-7494-607-3.

MLÝNEK, J., PETRŮ, M., RYVOLOVÁ, M. , and RAHIMIAN KOLOOR, S. S. Winding optimization of composite frame by dry fiber rovings Journal of Industrial Textiles Thousand Oaks: SAGE Publications Ltd, 2022, vol. 52, issue July-December. P. neuvedeny (26 stranky). ISSN: 1528-0837. https://journals.sagepub.com/doi/pdf/10.1177/15280837221114639

NOMAN, M. T., PETRŮ, M., LOUDA, P. , and KEJZLAR, P. Woven Textiles Coated with Zinc Oxide Nanoparticles and Their Thermophysiological Comfort Properties Journal of Natural Fibers PHILADELPHIA: TAYLOR & FRANCIS INC., 2022, vol. 19, issue 12. P. 4718 – 4730. ISSN: 1544-0478. https://www.tandfonline.com/doi/pdf/10.1080/15440478.2020.1870621

2021

YANG, T. et al. A comparison of fabric structures for carbon fiber reinforced composite: Laminated and orthogonal woven structures Polymer Composites Hoboken: Wiley, 2021, vol. 42, issue 10. P. 5300 – 5309. ISSN: 0272-8397. https://onlinelibrary.wiley.com/doi/10.1002/pc.26223

PETRŮ, M. , and YANG, T. Accelerating Fe(III)/Fe(II) cycle via Fe(II) substitution for enhancing Fenton-like performance of Fe-MOFs APPLIED CATALYSIS B-ENVIRONMENTAL 1. ed. Amsterdam: Elsevier, 2021, vol. 286, issue 6. P. neuvedeny (34 stranky). ISSN: 0926-3373. https://www.sciencedirect.com/science/article/pii/S0926337320312765?via=ihub

NOMAN, M. T. et al. Aerogels for Biomedical, Energy and Sensing Applications GELS Basel: MDPI, 2021, vol. 7, issue 4. P. neuvedeny (17 stran). ISSN: 2310-2861. https://www.mdpi.com/2310-2861/7/4/264

PETRŮ, M. , and RAHIMIAN KOLOOR, S. S. An Extended Thickness-Dependent Moisture Absorption Model for Unidirectional Carbon/Epoxy Composites Polymers 1. ed. Basel: MDPI, 2021, vol. 13, issue 3. P. neuvedeny (13 stran). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/13/3/440

PETRŮ, M. , and RAHIMIAN KOLOOR, S. S. An optimum fatigue design of polymer composite CNG tank using hybrid finite element-response surface methods Polymers 1. ed. Basel: MDPI, 2021, vol. 13, issue 4. P. neuvedeny (15 stran). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/13/4/483

YANG, T. et al. Application of Acoustical Method to Characterize Nonwoven Material Fibers and Polymers 1. ed. Soul: Korean Fiber Society, 2021, vol. 22, issue 3. P. 831 – 840. ISSN: 1229-9197. https://link.springer.com/article/10.1007/s12221-021-9958-4

KUKAČKA, L. et al. Brightness Matching Experiments With Pulsed Light: Experiment Design IEEE Transactions on Industry Applications 1. ed. Piscataway: Institute of Electrical and Electronics Engineers, 2021, vol. 57, issue 1. P. 1105 – 1112. ISSN: 0093-9994. https://ieeexplore.ieee.org/document/9253689

AMOR, N., NOMAN, M. T. , and PETRŮ, M. Classification of Textile Polymer Composites: Recent Trends and Challenges Polymers 1. ed. Basel: MDPI, 2021, vol. 13, issue 16. P. neuvedeny (27 stranky). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/13/16/2592

ABDELKADER, M. et al. Combined Use of Modal Analysis and Machine Learning for Materials Classification Materials 1. ed. Basel: MDPI, 2021, vol. 14, issue 15. P. neuvedeny (15 stran). ISSN: 1996-1944. https://www.mdpi.com/1996-1944/14/15/4270/htm

RAHIMIAN KOLOOR, S. S. , and PETRŮ, M. Displacement Rate Effects on the Mode II Shear Delamination Behavior of Carbon Fiber/Epoxy Composites Polymers 1. ed. Basel: MDPI, 2021, vol. 13, issue 11. P. neuvedeny (18 stran). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/13/11/1881

PETRŮ, M. , and RAHIMIAN KOLOOR, S. S. Dynamic response of aluminium sheet 2024-T3 subjected to close-range shock wave: experimental and numerical studies Journal of Materials Research and Technology 1. ed. Amsterdam: Elsevier, 2021, vol. 10, issue 1-3. P. 349 – 362. ISSN: 2238-7854. https://www.sciencedirect.com/science/article/pii/S2238785420321062

RAHIMIAN KOLOOR, S. S. , and PETRŮ, M. Effect of Alumina Additives on Mechanical and Fresh Properties of Self-Compacting Concrete: A Review Processes 1. ed. Basel: MDPI, 2021, vol. 9, issue 3. P. 1 – 22. ISSN: 2227-9717. https://www.mdpi.com/2227-9717/9/3/554

PETRŮ, M. , and BEHERA, P. K. Effect of internal mold release agent on flexural and inter laminar shear properties of carbon and glass fabric reinforced thermoset composites Polymers for Advanced Technologies 1. ed. HOBOKEN: Wiley, 2021, vol. 32, issue 1. P. 282 – 293. ISSN: 1042-7147. https://onlinelibrary.wiley.com/doi/pdf/10.1002/pat.5084

PETRŮ, M., AMOR, N. , and NOMAN, M. T. Excellent uv‐light triggered photocatalytic performance of zno.Sio2 nanocomposite for water pollutant compound methyl orange dye Nanomaterials Basel: MDPI, 2021, vol. 11, issue 10. P. neuvedeny (17 stran). ISSN: 2079-4991. https://www.mdpi.com/2079-4991/11/10/2548

PETRŮ, M. , and WANG, X. Experimental study on fracture properties of CFRP-to-concrete interface subject to salt water Composite Structures 1. ed. Oxford: Elsevier, 2021, vol. 258, issue 2. P. neuvedeny (10 stran). ISSN: 0263-8223. https://www.sciencedirect.com/science/article/pii/S0263822320331056

PETRŮ, M. , and RAHIMIAN KOLOOR, S. S. Experimental Study on the Effect of Basalt Fiber and Sodium Alginate in Polymer Concrete Exposed to Elevated Temperature Processes 1. ed. Basel: MDPI, 2021, vol. 9, issue 3. P. neuvedeny (16 stran). ISSN: 2227-9717. https://www.mdpi.com/2227-9717/9/3/510

MLÝNEK, J., RAHIMIAN KOLOOR, S. S., MARTINEC, T. , and PETRŮ, M. Fabrication of High-Quality Straight-Line Polymer Composite Frame with Different Radius Parts Using Fiber Winding Process Polymers 1. ed. Basel: MDPI, 2021, vol. 13, issue 4. P. neuvedeny (22 stranky). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/13/4/497

PETRŮ, M. , and RAHIMIAN KOLOOR, S. S. First Principal Simulation Study of Human Body Compatible Molecular Single Electron Transistors IEEE Access New Jersey: IEEE, 2021, vol. 9, issue 10. P. 153548 – 153559. ISSN: 2169-3536. https://ieeexplore.ieee.org/abstract/document/9557292/authors#authors

RAHIMIAN KOLOOR, S. S. , and PETRŮ, M. Fourth generation biofuel from genetically modified algal biomass: Challenges and future directions Chemosphere 1. ed. OXFORD: Elsevier, 2021, vol. 285, issue EARLY ACCESS. P. neuvedeny (14 stran). ISSN: 0045-6535. https://www.sciencedirect.com/science/article/pii/S0045653521020075?via=ihub

MAŠÍN, I. , and JANDURA, P. Funkční vzorek antivirálního kombinovaného čističe vzduchu pro komunitní a zdravotnické stany a přístřešky [funkční vzorek]

MILITKÝ, J. et al. Funkční vzorek kompozitu s hybridními nanočásticemi se zlepšenými mechanickými vlastnostmi [funkční vzorek]

PETRŮ, M. et al. Funkční vzorek nosného prvku rámové konstrukce [funkční vzorek]

MAHMOOD, A. et al. Geopolymers and Fiber-Reinforced Concrete Composites in Civil Engineering Polymers 1. ed. Basel: MDPI, 2021, vol. 13, issue 13. P. neuvedeny (34 stranky). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/13/13/2099/htm

RAHIMIAN KOLOOR, S. S. , and PETRŮ, M. Graphene Nanoparticle-Based, Nitrate Ion Sensor Characteristics Nanomaterials 1. ed. Basel: MDPI, 2021, vol. 11, issue 1. P. neuvedeny (19 stran). ISSN: 2079-4991. https://www.mdpi.com/2079-4991/11/1/150

PETRŮ, M. , and RAHIMIAN KOLOOR, S. S. Heat insulation effect in solar radiation of polyurethane powder coating nanocomposite Scientific Reports Berlin: NATURE RESEARCH, 2021, vol. 11, issue 1. P. neuvedeny (9 stran). ISSN: 2045-2322. https://www.nature.com/articles/s41598-021-00181-1

RAHIMIAN KOLOOR, S. S. , and PETRÍK, S. Hybrid and Synthetic FRP Composites under Different Strain Rates: A Review Polymers MDPI, 2021, vol. 13, issue 19. P. neuvedeny (23 stranky). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/13/19/3400

BEHERA, P. K. Influence of cellulosic and non-cellulosic particle fillers on mechanical, dynamic mechanical, and thermogravimetric properties of waste cotton fibre reinforced green composites COMPOSITES PART B-ENGINEERING 1. ed. Oxford: Elsevier, 2021, vol. 207, issue 2. P. 1 – 10. ISSN: 1359-8368. https://www.sciencedirect.com/science/article/pii/S1359836820336416?via=ihub

MALENA, V. et al. Inteligentní regulační subsystém pro ohřívače vzduchu [funkční vzorek]

RAHIMIAN KOLOOR, S. S. , and PETRŮ, M. Investigation of effective geometrical parameters on wear of hot forging die Journal of Materials Research and Technology 1. ed. Amsterdam: Elsevier, 2021, vol. 15, issue 11-12. P. 5221 – 5231. ISSN: 2238-7854. https://www.sciencedirect.com/science/article/pii/S2238785421012291

RAHIMIAN KOLOOR, S. S. , and PETRŮ, M. Influence of barium addition on the formation of primary Mg2Si crystals from AleMgeSi melts Journal of Materials Research and Technology 1. ed. Amsterdam: Elsevier, 2021, vol. 11, issue 3. P. 448 – 465. ISSN: 2238-7854. https://www.sciencedirect.com/science/article/pii/S223878542100051X

RAHIMIAN KOLOOR, S. S. , and PETRŮ, M. Linear-Nonlinear Stiffness Responses of Carbon Fiber-Reinforced Polymer Composite Materials and Structures: A Numerical Study Polymers 1. ed. Basel: MDPI, 2021, vol. 13, issue 3. P. neuvedeny (22 stranky). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/13/3/344/htm

NEJAD, A. F., RAHIMIAN KOLOOR, S. S., HAMZAH, S. M. S. A. S. , and YAHYA, M. Y. Mechanical Behaviour of Pin-Reinforced Foam Core Sandwich Panels Subjected to Low Impact Loading Polymers Basel: MDPI, 2021, vol. 13, issue 21. P. neuvedeny (17 stran). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/13/21/3627

RAHIMIAN KOLOOR, S. S. , and PETRŮ, M. Micro- and Nanocellulose in Polymer Composite Materials: A Review Polymers 1. ed. Basel: MDPI, 2021, vol. 13, issue 2. P. neuvedeny (35 stranky). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/13/2/231

WANG, X. , and PETRŮ, M. Modeling the dynamics behavior of flax fiber reinforced composite after water aging using a modified Huet-Sayegh viscoelastic model with fractional derivatives Construction and Building Materials 1. ed. Amsterdam: Elsevier, 2021, vol. 290, issue 8. P. neuvedeny (6 stran). ISSN: 0950-0618. https://www.sciencedirect.com/science/article/pii/S0950061821006395?via=ihub

PETRŮ, M. , and RAHIMIAN KOLOOR, S. S. Monolayer Twisted Graphene-Based Schottky Transistor Materials Basel: MDPI, 2021, vol. 14, issue 15. P. 1 – 11. ISSN: 1996-1944. https://www.mdpi.com/1996-1944/14/15/4109/htm

ALI, A. et al. Multifunctional electrically conductive copper electroplated fabrics sensitizes by in-situ deposition of copper and silver nanoparticles Nanomaterials Basel: MDPI, 2021, vol. 11, issue 11. P. neuvedeny (24 stranky). ISSN: 2079-4991. https://www.mdpi.com/2079-4991/11/11/3097

AMOR, N., NOMAN, M. T., PETRŮ, M. , and MAHMOOD, A. Neural network-crow search model for the prediction of functional properties of nano TiO2 coated cotton composites Scientific Reports 1. ed. Berlin: NATURE RESEARCH, 2021, vol. 11, issue 1. P. neuvedeny (13 stran). ISSN: 2045-2322. https://www.nature.com/articles/s41598-021-93108-9.pdf

NOMAN, M. T. et al. Photocatalytic Behaviour of Zinc Oxide Nanostructures on Surface Activation of Polymeric Fibres Polymers 1. ed. Basel: MDPI, 2021, vol. 13, issue 8. P. neuvedeny (18 stran). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/13/8/1227

AMOR, N., NOMAN, M. T. , and PETRŮ, M. Prediction of functional properties of nano TiO2 coated cotton composites by artificial neural network Scientific Reports 1. ed. Berlin: NATURE RESEARCH, 2021, vol. 11, issue 1. P. neuvedeny (11 stran). ISSN: 2045-2322. https://www.nature.com/articles/s41598-021-91733-y

AMOR, N., NOMAN, M. T. , and PETRŮ, M. Prediction of methylene blue removal by nano TiO2 using deep neural network Polymers Basel: MDPI, 2021, vol. 13, issue 18. P. neuvedeny (12 stran). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/13/18/3104

PETRŮ, M. , and RAHIMIAN KOLOOR, S. S. Representative Cell Analysis for Damage-Based Failure Model of Polymer Hexagonal Honeycomb Structure under the Out-of-Plane Loadings Polymers 1. ed. Basel: MDPI, 2021, vol. 13, issue 1. P. neuvedeny (23 stranky). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/13/1/52

PETRŮ, M. , and RAHIMIAN KOLOOR, S. S. Role B4C Addition on Microstructure, Mechanical, and Wear Characteristics of Al-20% Mg2Si Hybrid Metal Matrix Composite Applied Sciences 1. ed. MDPI AG, 2021, vol. 11, issue 7. P. neuvedeny (22 stranky). ISSN: 2076-3417. https://www.mdpi.com/2076-3417/11/7/3047/pdf

PETRŮ, M. , and RAHIMIAN KOLOOR, S. S. Separation of ctDNA by Superparamagnetic Bead Particles in Microfluidic Platform for Early Cancer Detection JOURNAL OF ADVANCED RESEARCH 1. ed. Amsterdam: Elsevier, 2021, vol. 33, issue NOV. P. 109 – 116. ISSN: 2090-1232. https://www.sciencedirect.com/science/article/pii/S2090123221000369?via=ihub

MILITKÝ, J. et al. Single-Step Green Synthesis of Highly Concentrated and Stable Colloidal Dispersion of Core-Shell Silver Nanoparticles and Their Antimicrobial and Ultra-High Catalytic Properties Nanomaterials BASEL: Mdpi, 2021, vol. 11, issue 4. P. neuvedeny (14 stran). ISBN: 978-80-270-8323-7, ISSN: 2079-4991. https://www.mdpi.com/2079-4991/11/4/1007

PETRŮ, M. , and RAHIMIAN KOLOOR, S. S. Strength and flexural behavior of steel fiber and silica fume incorporated self-compacting concrete Journal of Materials Research and Technology 1. ed. Amsterdam: Elsevier, 2021, vol. 12, issue 6. P. 1380 – 1390. ISSN: 2238-7854. https://www.sciencedirect.com/science/article/pii/S2238785421002933

RAHIMIAN KOLOOR, S. S. , and PETRŮ, M. Temperature Impact on Engineered Cementitious Composite Containing Basalt Fibers Applied Sciences 1. ed. Basel: MDPI, 2021, vol. 11, issue 15. P. neuvedeny (15 stran). ISSN: 2076-3417. https://www.mdpi.com/2076-3417/11/15/6848

YANG, K. et al. Thermal Analysis of PEG/Metal Particle-coated Viscose Fabric Polymer Testing 1. ed. OXFORD: Elsevier, 2021, vol. 100, issue AUG. P. neuvedeny (14 stran). ISSN: 0142-9418. https://www.sciencedirect.com/science/article/pii/S0142941821001811

XIONG, X. et al. Thermal Behavior of Aerogel-Embedded Nonwovens in Cross Airflow Autex Research Journal 1. ed. LODZ: AUTEX, 2021, vol. 21, issue 1. P. 115 – 124. ISSN: 1470-9589. https://www.researchgate.net/publication/339502155_Thermal_Behavior_of_Aerogel-Embedded_Nonwovens_in_Cross_Airflow

RAHIMIAN KOLOOR, S. S. , and PETRŮ, M. Thermal Delamination Modelling and Evaluation of Aluminium–Glass Fibre-Reinforced Polymer Hybrid Polymers 1. ed. Basel: MDPI, 2021, vol. 13, issue 4. P. neuvedeny (19 stran). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/13/4/492

WANG, Y. et al. Utility of whiskerized carbon fabric surfaces in resistive heating of composites Polymer Composites Hoboken: Wiley, 2021, vol. 42, issue 6. P. 2774 – 2786. ISSN: 0272-8397. https://doi.org/10.1002/pc.26012

2020

PETRŮ, M. , and RAHIMIAN KOLOOR, S. S. A Comparative Study of the Data-Driven Stochastic Subspace Methods for Health Monitoring of Structures: A Bridge Case Study Applied Sciences 1. ed. Basel: MDPI, 2020, vol. 10, issue 9. P. 1 – 18. ISSN: 2076-3417. https://www.mdpi.com/2076-3417/10/9/3132

RAHIMIAN KOLOOR, S. S. , and PETRŮ, M. A Review on Vehicle Classification and Potential Use of Smart Vehicle-Assisted Techniques Sensors 1. ed. Basel: MDPI, 2020, vol. 20, issue 11. P. neuvedeny (29 stranky). ISSN: 1424-8220. https://www.mdpi.com/1424-8220/20/11/3274

RAHIMIAN KOLOOR, S. S. , and PETRŮ, M. An Analytical Conductance Model for Gas Detection Based on a Zigzag Carbon Nanotube Sensor Sensors 1. ed. Basel: MDPI, 2020, vol. 20, issue 2. P. neuvedeny (12 stran). ISSN: 1424-8220. https://www.mdpi.com/1424-8220/20/2/357

RAHIMIAN KOLOOR, S. S. , and PETRŮ, M. An Energy-Based Concept for Yielding of Multidirectional FRP Composite Structures Using a Mesoscale Lamina Damage Model Polymers 1. ed. Basel: MDPI, 2020, vol. 12, issue 1. P. neuvedeny (18 stran). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/12/1/157

RAHIMIAN KOLOOR, S. S. , and PETRŮ, M. Analytical Approach to Study Sensing Properties of Graphene Based Gas Sensor Sensors 1. ed. Basel: MDPI, 2020, vol. 20, issue 5. P. neuvedeny (14 stran). ISSN: 1424-8220. https://www.mdpi.com/1424-8220/20/5/1506

PETRŮ, M. , and RAHIMIAN KOLOOR, S. S. Analytical Prediction of Highly Sensitive CNT-FET-Based Sensor Performance for Detection of Gas Molecules IEEE Access 1. ed. New Jersey: IEEE, 2020, vol. 8, issue 1. P. 12655 – 12661. ISSN: 2169-3536. https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8955777

RAHIMIAN KOLOOR, S. S. , and PETRŮ, M. Application of the Subspace-Based Methods in Health Monitoring of Civil Structures: A Systematic Review and Meta-Analysis Applied Sciences 1. ed. Basel: MDPI, 2020, vol. 10, issue 10. P. neuvedeny (38 stranky). ISSN: 2076-3417. https://www.mdpi.com/2076-3417/10/10/3607

RYVOLOVÁ, M. , and VOSÁHLO, J. Basalt reinforced plastic-development and modeling of part Material Science Forum 1. ed. Trans Tech Publications Ltd, 2020, vol. 994, issue 2020. P. 115 – 124. ISSN: 0255-5476. https://www.scientific.net/MSF.994.115

RAHIMIAN KOLOOR, S. S. , and PETRŮ, M. Carbon Nanoparticle-Based Electro-Thermal Building Block Applied Sciences 1. ed. Basel: MDPI, 2020, vol. 10, issue 15. P. neuvedeny (10 stran). ISSN: 2076-3417. https://www.mdpi.com/2076-3417/10/15/5117?type=check_update&version=1

RAHIMIAN KOLOOR, S. S. , and PETRŮ, M. Carbon-based Band Gap Engineering in the h-BN Analytical Modeling Materials 1. ed. Basel: MDPI, 2020, vol. 13, issue 5. P. neuvedeny (10 stran). ISSN: 1996-1944. https://www.mdpi.com/1996-1944/13/5/1026

YANG, T., PETRŮ, M., XIONG, X. , and MILITKÝ, J. Characterization on Polyester Fibrous Panels and Their Homogeneity Assessment Polymers 1. ed. Basel: MDPI, 2020, vol. 12, issue 9. P. neuvedeny (13 stran). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/12/9/2098

HU, S. et al. Copper coated textiles for inhibition of virus spread Textile Bioengineering and Informatics Symposium Proceedings 2020 - 13th Textile Bioengineering and Informatics 1. ed. Manchester: TBIS, 2020 P. 84 – 91. ISSN: 1942-3438. https://search.bvsalud.org/global-literature-on-novel-coronavirus-2019-ncov/resource/en/covidwho-908473

PETRŮ, M. , and RAHIMIAN KOLOOR, S. S. Coulomb Blockade Effect in Well-Arranged 2D Arrays of Palladium Nano-Islands for Hydrogen Detection at Room Temperature: A Modeling Study Nanomaterials 1. ed. Basel: MDPI, 2020, vol. 10, issue 5. P. neuvedeny (12 stran). ISSN: 2079-4991. https://www.mdpi.com/2079-4991/10/5/835

WANG, X. , and PETRŮ, M. Degradation of bending properties of flax fiber reinforced polymer after natural aging and accelerated aging Construction and Building Materials 1. ed. Oxford: Elsevier, 2020, vol. 240, issue 4. P. neuvedeny (7 stran). ISSN: 0950-0618. https://www.sciencedirect.com/science/article/abs/pii/S0950061819333628?via=ihub

PENG, Q. et al. Dendrimer-grafted PLGA nanofibrous matrix-mediated gene delivery systems Textile Bioengineering and Informatics Symposium Proceedings 2020 - 13th Textile Bioengineering and Informatics Symposium, TBIS 2020 1. ed. Manchester: TBIS, 2020 P. 152 – 158. ISSN: 1942-3438.

RYVOLOVÁ, M. , and VOSÁHLO, J. Determination of Mechanical Properties of FRP by Bending Test Lecture Notes in Mechanical Engineering 1. ed. Switzerland: Springer International Publishing, 2020 P. 581 – 587. ISBN: 978-303033145-0, ISSN: 2195-4356. https://link.springer.com/chapter/10.1007/978-3-030-33146-7_66

WANG, Y. et al. Disinfection mechanisms of UV light and ozonization Textile Bioengineering and Informatics Symposium Proceedings 2020 - 13th Textile Bioengineering and Informatics 1. ed. Manchester: TBIS, 2020 P. 173 – 180. ISSN: 1942-3438. https://search.bvsalud.org/global-literature-on-novel-coronavirus-2019-ncov/resource/en/covidwho-908483

SRB, P. , and RYVOLOVÁ, M. Dynamic Analysis of Carbon Woven Reinforced Epoxy Matrix Composites Used for Parts of Electric Vehicles Experimental Stress Analysis - 58th International Scientific Conference, EAN 2020 1. ed. Ostrava: Vysoká škola báňská - Technická Univerzita Ostrava, 2020 P. 471 – 475. ISBN: 978-802484451-0.

NOMAN, M. T. , and PETRŮ, M. Effect of Sonication and Nano TiO2 on Thermophysiological Comfort Properties of Woven Fabrics ACS Omega 1. ed. WASHINGTON: American Chemical Society, 2020, vol. 5, issue 20. P. 11481 – 11490. ISSN: 2470-1343. https://pubs.acs.org/doi/10.1021/acsomega.0c00572

RAHIMIAN KOLOOR, S. S. Effects of cell aspect ratio and relative density on deformation response and failure of honeycomb core structure Materials Research Express 1. ed. Bristol: IOP Publishing, 2020, vol. 7, issue 1. P. neuvedeny (17 stran). ISSN: 2053-1591. https://iopscience.iop.org/article/10.1088/2053-1591/ab6926/pdf

WANG, Y. et al. Electrical Heating Properties of Various Carbonized Textile Structures Textile Bioengineering and Informatics Symposium Proceedings 2020 - 13th Textile Bioengineering and Informatics Symposium, TBIS 2020 1. ed. TBIS, 2020 P. 99 – 106. ISBN: 978-1-71381-855-7, ISSN: 1942-3438.

BEHERA, P. K., NOMAN, M. T. , and PETRŮ, M. Enhanced Mechanical Properties of Eucalyptus-Basalt-Based Hybrid-Reinforced Cement Composites Polymers 1. ed. Basel: MDPI, 2020, vol. 12, issue 12. P. neuvedeny (15 stran). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/12/12/2837

PETRŮ, M. , and RAHIMIAN KOLOOR, S. S. Estimation of Critical Dimensions for the Crack and Pitting Corrosion Defects in the Oil Storage Tank Using Finite Element Method and Taguchi Approach Metals 1. ed. Basel: MDPI, 2020, vol. 10, issue 10. P. neuvedeny (15 stran). ISSN: 2075-4701. https://www.mdpi.com/2075-4701/10/10/1372

PETRŮ, M. , and RAHIMIAN KOLOOR, S. S. Experimental and Numerical Analysis of Fatigue Life of Aluminum Al 2024-T351 at Elevated Temperature Metals 1. ed. Basel: MDPI, 2020, vol. 10, issue 12. P. neuvedeny (14 stran). ISSN: 2075-4701. https://www.mdpi.com/2075-4701/10/12/1581

MLÝNEK, J., PETRŮ, M., MARTINEC, T. , and RAHIMIAN KOLOOR, S. S. Fabrication of High-Quality Polymer Composite Frame by a New Method of Fiber Winding Process Polymers 1. ed. Basel: MDPI, 2020, vol. 12, issue 5. P. neuvedeny (30 stranky). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/12/5/1037

RAHIMIAN KOLOOR, S. S. , and PETRŮ, M. Failure of glass fibre-reinforced polypropylene metal laminate subjected to close-range explosion Polymers 1. ed. Basel: MDPI, 2020, vol. 12, issue 9. P. neuvedeny (14 stran). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/12/9/2139

NOMAN, M. T. , and PETRŮ, M. Functional Properties of Sonochemically Synthesized Zinc Oxide Nanoparticles and Cotton Composites Nanomaterials 1. ed. Basel: MDPI, 2020, vol. 10, issue 9. P. neuvedeny (14 stran). ISSN: 2079-4991. https://www.mdpi.com/2079-4991/10/9/1661

RAHIMIAN KOLOOR, S. S. , and PETRŮ, M. Health Monitoring of Civil Infrastructures by Subspace System Identification Method: An Overview Applied Sciences 1. ed. Basel: MDPI, 2020, vol. 10, issue 8. P. neuvedeny (29 stranky). ISSN: 2076-3417. https://www.mdpi.com/2076-3417/10/8/2786/htm

PETRŮ, M. , and RAHIMIAN KOLOOR, S. S. Improving ‘Lipid Productivity’ in Microalgae by Bilateral Enhancement of Biomass and Lipid Contents: A Review Sustainability 1. ed. Basel: MDPI, 2020, vol. 12, issue 21. P. neuvedeny (28 stranky). ISSN: 2071-1050. https://www.mdpi.com/2071-1050/12/21/9083

PETRŮ, M. , and RAHIMIAN KOLOOR, S. S. Investigation on the Curvature Correction Factor of Extension Spring Materials 1. ed. Basel: MDPI, 2020, vol. 13, issue 18. P. neuvedeny (14 stran). ISSN: 1996-1944. https://www.mdpi.com/1996-1944/13/18/4199/htm

RAHIMIAN KOLOOR, S. S. , and PETRŮ, M. Isolation and Characterization of a Novel Bacterium from the Marine Environment for Trichloroacetic Acid Bioremediation Applied Sciences 1. ed. Basel: MDPI, 2020, vol. 10, issue 13. P. neuvedeny (17 stran). ISSN: 2076-3417. https://www.mdpi.com/2076-3417/10/13/4593

SIERATOVSKI, J. et al. Lamella for Fireproof Gates And a Fireproof Gate Comprising These Lamellas [patent] Granted at 20200708 as No. EP3511510 B1. https://worldwide.espacenet.com/publicationDetails/biblio?II=0&ND=3&adjacent=true&locale=en_EP&FT=D&date=20190717&CC=EP&NR=3511510A1&KC=A1

BERAN, J. et al. Linka na výrobu plošného kompozitního materiálu s obsahem nanovláken [funkční vzorek]

BERAN, J. et al. Linka na výrobu plošných kompozitních nanovlákenných materiálů s využitím AC elektrospinningu. Výzkumná zpráva dílčího projektu TN01000015 NCK za rok 2020, 2020

PETRŮ, M. , and RAHIMIAN KOLOOR, S. S. Mechanical Characterization of Heterogeneous Polycrystalline Rocks Using Nanoindentation Method in Combination with Generalized Means Method Journal of Mechanics 1. ed. Cambridge: Cambridge University Press, 2020, vol. 36, issue 2. P. 813 – 823. ISSN: 1727-7191. https://www.cambridge.org/core/journals/journal-of-mechanics/article/mechanical-characterization-of-heterogeneous-polycrystalline-rocks-using-nanoindentation-method-in-combination-with-generalized-means-method/A182BB7B339C6C36D589A36BCE7E4A83

WANG, X. , and PETRŮ, M. Mode I fracture evaluation of carbon fiber reinforced polymer/steel interfaces subject to freeze-thaw cycling Engineering Failure Analysis 1. ed. Oxford: Elsevier, 2020, vol. 110, issue 3. P. neuvedeny (17 stran). ISSN: 1350-6307. https://www.sciencedirect.com/science/article/pii/S1350630719308386

RAHIMIAN KOLOOR, S. S. , and PETRŮ, M. Moisture absorption effects on mode II delamination of carbon/epoxy composites Polymers 1. ed. Basel: MDPI, 2020, vol. 12, issue 9. P. neuvedeny (13 stran). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/12/9/2162

MANSOOR, T., HES, L., BAJZÍK, V. , and NOMAN, M. T. Novel method on thermal resistance prediction and thermo-physiological comfort of socks in a wet state Textile Research Journal 1. ed. LONDON, ENGLAND: SAGE PUBLICATIONS LTD, 2020, vol. 90, issue 17-18. P. 1987 – 2006. ISSN: 0040-5175. https://journals.sagepub.com/doi/full/10.1177/0040517520902540

WANG, X. , and PETRŮ, M. Numerical investigation for the fatigue performance of reinforced concrete beams strengthened with external prestressed HFRP sheet Construction and Building Materials 1. ed. Oxford: Elsevier, 2020, vol. 237, issue 3. P. neuvedeny (15 stran). ISSN: 0950-0618. https://www.sciencedirect.com/science/article/abs/pii/S0950061819330533#!

PETRŮ, M. , and RAHIMIAN KOLOOR, S. S. Numerical Prediction of Residual Stresses Distribution in Thin-Walled Press-Braked Stainless Steel Sections Materials 1. ed. Basel: MDPI, 2020, vol. 13, issue 23. P. 1 – 31. ISSN: 1996-1944. https://www.mdpi.com/1996-1944/13/23/5378

RAHIMIAN KOLOOR, S. S. , and PETRŮ, M. On the Performance of Small-Scale Horizontal Axis Tidal Current Turbines. Part 1: One Single Turbine Sustainability 1. ed. Basel: MDPI, 2020, vol. 12, issue 15. P. neuvedeny (23 stranky). ISSN: 2071-1050. https://www.mdpi.com/2071-1050/12/15/5985

NOMAN, M. T., PETRŮ, M., MILITKÝ, J. , and MUSADDAQ, A. One-Pot Sonochemical Synthesis of ZnO Nanoparticles for Photocatalytic Applications, Modelling and Optimization Materials 1. ed. Basel: MDPI, 2020, vol. 13, issue 1. P. neuvedeny (19 stran). ISSN: 1996-1944. https://www.mdpi.com/1996-1944/13/1/14

RAHIMIAN KOLOOR, S. S. , and PETRŮ, M. Optimum Design of Sunken Reinforced Enclosures under Buckling Condition Applied Sciences 1. ed. Basel: MDPI, 2020, vol. 10, issue 23. P. neuvedeny (14 stran). ISSN: 2076-3417. https://www.mdpi.com/2076-3417/10/23/8449

PETRŮ, M. , and RAHIMIAN KOLOOR, S. S. Performance improvement of a new proposed Savonius hydrokinetic turbine: a numerical investigation Energy Reports 1. ed. Oxford: Elsevier, 2020, vol. 6, issue 11. P. 3051 – 3066. ISSN: 2352-4847. https://www.sciencedirect.com/science/article/pii/S2352484720314335?via=ihub

YANG, T. , and PETRŮ, M. Porous Film Coating Enabled by Polyvinyl Pyrrolidone (PVP) for Enhanced Air Permeability of Fabrics: The Effect of PVP Molecule Weight and Dosage Polymers 1. ed. Basel: MDPI, 2020, vol. 12, issue 12. P. neuvedeny (12 stran). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/12/12/2961

PETRŮ, M. , and VOSÁHLO, J. Principles of Increasing the Winding Effectivity of Composite Prepregs to Construction Application Lecture Notes in Mechanical Engineering - Current Methods of Construction Design 1. ed. Switzerland: Springer International Publishing, 2020 P. 557 – 564. ISBN: 978-3-030-33145-0, ISSN: 2195-4356. https://www.springer.com/gp/book/9783030331450

PETRŮ, M. et al. Prototyp odlehčené palety s kompozitními prvky za účelem snižování hmotnosti a redukce uhlíkové stopy vlivem přepravy [funkční vzorek]

YANG, T. et al. Sound Absorption Properties of Natural Fibers: A Review Sustainability 1. ed. Basel: MDPI, 2020, vol. 12, issue 20. P. neuvedeny (27 stranky). ISSN: 2071-1050. https://www.mdpi.com/2071-1050/12/20/8477

MUSADDAQ, A. et al. Structural design of efficient fog collectors: A review Environmental Technology & Innovation 1. ed. Oxford: Elsevier, 2020, vol. 20, issue 11. P. neuvedeny (17 stran). ISSN: 2352-1864. https://www.sciencedirect.com/science/article/pii/S2352186420314693

RYVOLOVÁ, M., ŠKODOVÁ, M., LOUDA, P. , and VOLESKÝ, L. Studium degradace skleněných vláken v zásaditém prostředí pomocí zobrazovacích metod Jemná mechanika a optika olomouc: FZU AV ČR, 2020 P. 98 – 102. ISSN: 0447-6441. https://jmo.fzu.cz/sites/jmo.fzu.cz/files/oldweb/2020/2020-04/jmo_20_04_obsah.pdf

PETRŮ, M. et al. Technologie pro efektivní výrobu plastových obalů [ověřená technologie]. 2020.

TAN, X. et al. The effect of electrode materials and ultrasound on electrochemical reduction Textile Bioengineering and Informatics Symposium Proceedings 2020 - 13th Textile Bioengineering and Informatics Symposium, TBIS 2020 1. ed. Manchester: TBIS, 2020 P. 554 – 560. ISSN: 1942-3438.

RAHIMIAN KOLOOR, S. S. , and PETRŮ, M. The effect of lateral load type on shear lag of concrete tubular structures with different plan geometries Crystals 1. ed. Basel: MDPI, 2020, vol. 10, issue 10. P. neuvedeny (15 stran). ISSN: 2073-4352. https://www.mdpi.com/2073-4352/10/10/897/htm

MAZAČ, M. , and MALÝ, M. The Gearing Temperature Shock Oscillation Lecture Notes in Mechanical Engineering, Current Methods of Construction Design 1. ed. Springer Nature Switzerland AG: Springer International Publishing, 2020 P. 113 – 119. ISBN: 978-303033145-0, ISSN: 2195-4356. https://www.springer.com/gp/book/9783030331450

YANG, T. et al. Theoretical and Experimental Studies on Thermal Properties of Polyester Nonwoven Fibrous Material Materials 1. ed. Basel: MDPI, 2020, vol. 13, issue 12. P. neuvedeny (20 stran). ISSN: 1996-1944. https://www.mdpi.com/1996-1944/13/12/2882

YANG, K. et al. Thermal performance of a multi-layer composite containing peg/laponite as pcms Journal of Fiber Bioengineering and Informatics 1. ed. Global Science Press, 2020, vol. 13, issue 2. P. 61 – 68. ISSN: 1940-8676. https://global-sci.org/intro/article_detail/jfbi/17880.html

PETRŮ, M. , and RAHIMIAN KOLOOR, S. S. Thermal Performance of Alginate Concrete Reinforced with Basalt Fiber Crystals 1. ed. Basel: MDPI, 2020, vol. 10, issue 9. P. neuvedeny (15 stran). ISSN: 2073-4352. https://www.mdpi.com/2073-4352/10/9/779

NOMAN, M. T. et al. Thermophysiological comfort of sonochemically synthesized nano TiO2 coated woven fabrics Scientific Reports 1. ed. London: NATURE PUBLISHING GROUP, 2020, vol. 10, issue 1. P. neuvedeny (12 stran). ISSN: 2045-2322. https://www.nature.com/articles/s41598-020-74357-6

NOMAN, M. T., PETRŮ, M., AMOR, N. , and LOUDA, P. Thermophysiological comfort of zinc oxide nanoparticles coated woven fabrics Scientific Reports 1. ed. Berlin: NATURE RESEARCH, 2020, vol. 10, issue 1. P. 1 – 12. ISSN: 2045-2322. https://www.nature.com/articles/s41598-020-78305-2

XIONG, X. et al. Transport properties of electro-sprayed polytetrafluoroethylene fibrous layer filled with aerogels/phase change materials Nanomaterials 1. ed. Switzerland: MDPI, 2020, vol. 10, issue 10. P. neuvedeny (4 stranky). ISSN: 2079-4991. https://www.mdpi.com/2079-4991/10/10/2042

RAHIMIAN KOLOOR, S. S. , and PETRŮ, M. Using Finite Element Approach for Crashworthiness Assessment of a Polymeric Auxetic Structure Subjected to the Axial Loading Polymers 1. ed. Basel: MDPI, 2020, vol. 12, issue 6. P. neuvedeny (15 stran). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/12/6/1312

RAHIMIAN KOLOOR, S. S. , and PETRŮ, M. Vehicle-Assisted Techniques for Health Monitoring of Bridges Sensors 1. ed. Basel: MDPI, 2020, vol. 20, issue 12. P. neuvedeny (29 stranky). ISSN: 1424-8220. http://doi.org/10.3390/s20123460

KRČMAŘÍK, D. et al. Zařízení pro napájení elektroniky internetu věcí na zemědělském stroji [utility model] Enlisted at 20200901 as No. 34350. https://isdv.upv.cz/doc/FullFiles/UtilityModels/FullDocuments/FDUM0034/uv034350.pdf

2019

KARTHIK, D. et al. Effect of particulate fillers on creep behaviour of epoxy composites Materials Today: Proceedings 1. ed. Oxford: Elsevier, 2019 P. 217 – 220. ISSN: 2214-7853. https://www.sciencedirect.com/science/article/pii/S2214785319337472#!

VENKATARAMAN, M. et al. Sophisticated Glass Tapes for Fabrication of Composites Journal of Fiber Bioengineering and Informatics 1. ed. Global Science Press, 2019, vol. 12, issue 1. P. 35 – 42. ISSN: 1940-8676. http://journal10.magtechjournal.com/Jwk_JoFBaI/EN/Y2019/V12/I1/35#