Device

3D printing – technology PolyJet Matrix

System  Objet modelling from  ABS-like material for larger and accurate models.

Model & prototypes are firm, dimension stabile, easy for surface adjustment.

Testing in different temperature and humidity regimes

Filtration unit with flat membrane module, cross flow mode

Testing the bacterial filtration efficiency of air filters

The Whitley anaerobic sleeve box is used for the long-term maintenance of samples in an anaerobic atmosphere with a hydrogen content of 5%. It is suitable for culturing anaerobic microorganisms at laboratory or elevated temperatures (up to 58°C).

Asynchronous dynamometer

Documentation system for acrylamide and agarose gels, blotting membranes (chemiluminescence, fluorescence)

Testing of cleaning processes (laboratory, semi-operational)

Profilometer: measurement of the roughness of the surface and grooves after tests on the tribometer and scratch test

Precise multi-base optical emission spectrometer

Fully digital spark optical emission spectrometer with digital Bit-Stream plasma generator and double CCD optical system. Designed for routine analysis of smelting plants, laboratories and quality control labs. Tasman is full immune against changes in outside temperature.

Large capacity centrifuge

Germination, hydroponics, exposure to toxic substances, solid substrates - plant growth experiments

Measurement of hardness and other mechanical properties (Young's modulus) of thin (submicron) layers

- extruder with two 24 mm diameter conical screws

- water cooling bath

- two volumetric feed material dispensers

- granulator

Due to its self-learning test method, delta-ANALYSER will not only provide fully automated and reliable protection from total loss of test objects and test benches. Additionally it offers information on the start of damage and cause of damage and thus provides engineers valuable input to optimise the design.

Thanks to the highly reproducible measurement results and the clear analysis, delta-ANALYSER helps to carry out comparison tests related to service strength and emergency operating features for variable assemblies, components or material combinations under realistic load conditions in a complete system. So users can put their products even closer to the physical limits regarding weight, emissions, service life and quality – and continue to leave the pack behind!

Fields of Application:

• Transmissions: Manual transmissions, automatic transmissions, dual clutch transmissions, CVT-transmissions, transfer cases and rear axle drives
• Engines: In-line engines, v-engines, w-engines, boxer engines, diesel engines, natural-gas engines, petrol engines,  hybrid engines  and electric motors
• Components: Hydraulic pumps, hydraulic motors, small gears, servomotors and compressors, drive shafts, small components (roller cam followers, etc.)

Metallographic ripping saw enabling precise cutting of materials.

AMT PostPro SF100 is designed for chemical smoothening of polymeric materials (PA12, PA12GF, TPU, ABS, etc.)
The main advantage is the quality of the smoothening process and the resulting mechanical properties.

Atmospheric air coarse filtration testing

Preparation of homogeneous coatings on planar substrates

Analysis of the particle size distribution in the range of 1 nm-5 µm based on the differential sedimentation of particles under centrifugal force.

Magnetic structurescopy

Magnetic hardness tester
Measurement of perlit, ferrit, martensit, bainit
Degradation and deformation of austenitic steels

Implementation of static and dynamic tests

Ultra-high resolution scanning electron microscope equipped with Schottky cathode, imaging (SE2, InLens, ESB, AsB) and analytical detectors (EDS, WDS, EBSD) for complex characterization of nanomaterials and structures.

Separation of biomolecules with subsequent detection and quantification.

Analysis using the combustion of organic material into defined gaseous products, on the basis of which the content of elements C, H, N, S in the matrix is subsequently determined.