Staff Directory
2023
- SEIDL, M., HABR, J., ŠAFKA, J. , and BOBEK, J. Flexible silicone ocular prosthesis MM Science Journal Praha: MM SCIENCE, 2023, vol. 2023, issue June. P. 6431 – 6434. ISSN: 1803-1269. https://www.mmscience.eu/journal/issues/june-2023/articles/flexible-silicone-ocular-prosthesis
- SEIDL, M., HABR, J., ŠAFKA, J. , and BOBEK, J. Recycled pa 12 excluded from processing by additive technologies MM Science Journal Praha: MM SCIENCE, 2023, vol. 2023, issue June. P. 6426 – 6430. ISSN: 1803-1269. https://www.mmscience.eu/journal/issues/june-2023/articles/recycled-pa-12-excluded-from-processing-by-additive-technologies
2022
- SEIDL, M. , and ROTH, V. Inovativní technologie enkapsulace skel [ověřená technologie]. 2022.
- SEIDL, M. Ověření zpracovatelnosti recyklovaného polyamidu s označením Renyl 12 [ověřená technologie]. 2022.
- HABR, J., SEIDL, M., ŠAFKA, J. , and BOBEK, J. Silikonová oční protéza [utility model] Enlisted at 20221227 as No. 36 731. https://isdv.upv.cz/doc/FullFiles/UtilityModels/FullDocuments/FDUM0036/uv036731.pdf
- HABR, J., SEIDL, M., ŠAFKA, J. , and BOBEK, J. Silikonová oční protéza nové generace [funkční vzorek]
- SEIDL, M., HABR, J., ROTH, V. , and KORDOVÁ, T. Termoplastický elastomer na bázi styrenu [utility model] Enlisted at 20221229 as No. 36733. https://isdv.upv.cz/doc/FullFiles/UtilityModels/FullDocuments/FDUM0036/uv036733.pdf
2020
- ŠAFKA, J. et al. Ceramic 3d printing: Comparison of SLA and DLP technologies MM Science Journal 1. ed. Česká republika: MM Science Journal, 2020, vol. 2020, issue June. P. 3905 – 3911. ISSN: 1803-1269. https://www.mmscience.eu/journal/issues/june-2020/articles/ceramic-3d-printing-comparison-of-sla-and-dlp-technologies
- MALINA, R. , and SEIDL, M. Chemical4F [industrial model] Enlisted at 20200817 as No. 008052252-0001. https://euipo.europa.eu/eSearch/#details/designs/008052252-0001
- ŠAFKA, J. et al. FABRICATION PROCESS AND BASIC MATERIAL PROPERTIES OF THE BASF ULTRAFUSE 316LX MATERIAL MM Science Journal Czech Republic: MM Publishing, s.r.o., 2020, vol. 2020, issue 12. P. 4216 – 4222. ISSN: 1803-1269. https://www.mmscience.eu/journal/issues/december-2020/articles/fabrication-process-and-basic-material-properties-of-the-basf-ultrafuse-316lx-material
- SEIDL, M., MALINA, R., JANKELE, J. , and ŠAFKA, J. Filtroventilační jednotka [funkční vzorek]
- ŠAFKA, J. et al. Mechanical properties of two types of lattice structures fabricated with the use of hp multijet fusion technology MM Science Journal 1. ed. Czech Republic: MM publishing Ltd., 2020, vol. 2020, issue November. P. 4074 – 4079. ISSN: 1803-1269. https://www.mmscience.eu/journal/issues/november-2020/articles/mechanical-properties-of-two-types-of-lattice-structures-fabricated-with-the-use-of-hp-multijet-fusion-technology
- SEIDL, M., MALINA, R., JANKELE, J. , and ŠAFKA, J. Přetlaková kukla [funkční vzorek]
- SEIDL, M. , and ROTH, V. Testovací vstřikovací forma [funkční vzorek]
- SEIDL, M., ŠAFKA, J., BĚHÁLEK, L. , and NOVÁKOVÁ, I. Through transmission laser welding process optimization for semicrystalline and amorphous plastics MM Science Journal 1. ed. Praha: MM publishing Ltd., 2020, vol. 2020, issue 4. P. 4119 – 4123. ISSN: 1803-1269. https://www.mmscience.eu/journal/issues/november-2020/articles/through-transmission-laser-welding-process-optimization-for-semicrystalline-and-amorphous-plastics
- MALINA, R. , and SEIDL, M. Ultimate hood [industrial model] Enlisted at 20200820 as No. 008052260-0001. https://euipo.europa.eu/eSearch/#details/designs/008052260-0001
2019
- SEIDL, M. Konstrukce plastových dílů 1. ed. Liberec: Technická univerzita v Liberci, 2019 ISBN: 978-80-7494-461-1.
- SEIDL, M. Konstruktion von Kunststoffbauteilen 1. ed. Liberec: Vysokoškolský podnik Liberec s.r.o., 2019 ISBN: 978-80-7494-462-8.
- BOBEK, J., SEIDL, M., ŠAFKA, J. , and PŘINDIŠ, J. Polymerní biokompozitní materiál na bázi kyseliny polylaktické pro 3D tisk [utility model] Enlisted at 20190703 as No. 33045. https://isdv.upv.cz/webapp/resdb.print_detail.det?pspis=PUV/36253&plang=CS
- HABR, J., BOBEK, J. , and SEIDL, M. Polymerní kompozit s částicovým plnivem rostlinného původu [patent] Granted at 20190410 as No. 307809. https://isdv.upv.cz/doc/FullFiles/Patents/FullDocuments/307/307809.pdf
- DVOŘÁK, V. , and SEIDL, M. Přípravek pro hodnocení pracovního členu filtroventilační jednotky. [funkční vzorek]
2018
- BĚHÁLEK, L. et al. Fused deposition modeling vs. Injection moulding: influence of fiber orientation and layer thickness on the mechanical properties MM Science Journal Praha: MM Publishing, s.r.o., 2018, vol. 12, issue December. P. 2722 – 2726. ISSN: 1803-1269. http://www.mmscience.eu/journal/issues/december-2018/articles/fused-deposition-modelling-vs-injection-moulding-influence-of-fiber-orientation-and-layer-thickness-on-the-mechanical-properties
- BOBEK, J., SEIDL, M., ŠAFKA, J. , and PŘINDIŠ, J. Polymerní kompozitní materiál na bázi akrylonitrilbutadienstyrenu pro 3D tisk [utility model] Enlisted at 20181126 as No. 32369. http://isdv.upv.cz/doc/FullFiles/UtilityModels/FullDocuments/FDUM0032/uv032369.pdf
- BĚHÁLEK, L., ŠAFKA, J., SEIDL, M. , and BORŮVKA, M. The influence of humidity and temperature on the properties of photopolymer materials made by PolyJet technology MM Science Journal 1. ed. Praha: MM Publishing, 2018, vol. 2018, issue December. P. 2727 – 2731. ISSN: 1803-1269. http://www.mmscience.eu/journal/issues/december-2018/articles/the-influence-of-humidity-and-temperature-on-the-properties-of-photopolymer-materials-made-by-polyjet-technology
2017
- LENFELD, P. et al. Biokompozit s PLA matricí a vlákny banánovníku [patent] Granted at 20170712 as No. 306879. http://isdv.upv.cz/doc/FullFiles/Patents/FullDocuments/306/306879.pdf
- LENFELD, P. et al. Composite with synthetic polymeric matrix and cellulose in the form of natural fibre filler [patent] Granted at 20170628 as No. EP 2882805. http://isdv.upv.cz/doc/FullFiles/EP/ep2882805.pdf
- BOBEK, J., HABR, J., SEIDL, M. , and BĚHÁLEK, L. Hybridní kompozitní materiál se syntetickou polymerní matricí, vlákny konopí a skleněnými dutými kuličkami [patent] Granted at 20171122 as No. 307081. http://spisy.upv.cz/Patents/FullDocuments/307/307081.pdf
- SEIDL, M., BĚHÁLEK, L. , and HABR, J. Mechanical properties of hybrid composites based on polypropylene matrix MM Science Journal MM publishing Ltd., 2017, vol. 2017, issue December. P. 1947 – 1951. ISSN: 1805-0476.
- SEIDL, M. et al. Mechanical Properties of Products Made of Abs with Respect to Individuality of Fdm Production Processes MM Science Journal, 2017, vol. 2017, issue 2. P. 1748 – 1751. ISSN: 1803-1269. http://www.mmscience.eu/content/file/archives/MM_Science_2016188.pdf
- HABR, J. et al. Polymerní kompozit s přírodními vlákny a lehčenou matricí [patent] Granted at 20170712 as No. 306882. http://isdv.upv.cz/doc/FullFiles/Patents/FullDocuments/306/306882.pdf
- NOVÁKOVÁ, I., SEIDL, M. , and MORAVEC, J. The increase in effectivity of material processing with employment of liquid CO2 during aluminium die casting Key Engineering Materials Trans Tech Publications Ltd, 2017 P. 64 – 69. ISSN: 1013-9826.
2016
- HABR, J., BOBEK, J., BĚHÁLEK, L. , and SEIDL, M. Adhesion additive influence on polyamide nano polymer composite properties Defect and Diffusion Forum 1. ed. Pfaffikon, Switzerland: Trans Tech Publications Ltd, 2016 P. 142 – 145. ISBN: 978-3-03835-720-9, ISSN: 1012-0386. http://www.scientific.net/DDF.368.142
- NOVÁKOVÁ, I. et al. Cooling thin parts of pressure casting moulds by means of liquid CO
2 Key Engineering Materials 1. ed. Pfaffikon, Switzerland: Trans Tech Publications, 2016 P. 71 – 78. ISBN: 978-3-03835-629-5, ISSN: 1013-9826. http://www.scientific.net/KEM.669.71 - SEIDL, M. , and AMOR, N. Evaluation of applicability of unconventional cooling method in injection mould Manufacturing Technology 1. ed. Ústí nad Labem: Univerzita J. E. Purkyne, 2016, vol. 16, issue 1. P. 220 – 225. ISSN: 1213-2489.
- ŠAFKA, J. et al. Evaluation of the impact of production parameters on the final properties of the part made of nylon 12 with rapid prototyping technology (FDM) MM Science Journal MM Publishing, 2016, vol. 2016, issue September. P. 956 – 959. ISSN: 1803-1269. http://www.mmscience.eu/content/file/archives/MM_Science_201638.pdf
- HABR, J. et al. Hybridní polymerní kompozit s přírodními a skleněnými vlákny [utility model] Enlisted at 20160830 as No. 29734.
- HABR, J. et al. Hybridní polymerní kompozit s vlákny přírodního původu a skleněnými dutými kuličkami [utility model] Enlisted at 20160621 as No. 29559.
- HABR, J., SEIDL, M. , and BOBEK, J. Impact of innovative cooling system on mechanical properties of moulded parts Defect and Diffusion Forum 1. ed. Pfaffikon, Schwizerland: Trans Tech Publications Ltd., 2016 P. 49 – 52. ISBN: 978-3-03835-720-9, ISSN: 1012-0386. http://www.scientific.net/DDF.368.49
- SEIDL, M. et al. Influence of different coupling agent type on processibility and applicability of polymer composites Materials Science Forum 1. ed. Pfaffikon, Switzerland: Trans Tech Publications Ltd, 2016 P. 123 – 132. ISBN: 978-3-03835-728-5, ISSN: 0255-5476. http://www.scientific.net/MSF.862.123
- BRDLÍK, P., SEIDL, M., NOVÁKOVÁ, I. , and ŠAFKA, J. Konstrukční úprava jader a prvků tvořících a obklopujících tvarovou dutinu výrobního nástroje umožňující jejich chlazení zkapalněnými technickými plyny [utility model] Enlisted at 20160126 as No. 29074. http://spisy.upv.cz/UtilityModels/FullDocuments/FDUM0029/uv029074.pdf
- BRADÁČ, J. et al. Machines for Processing Metals and Plastics 1. ed. Liberec: Technická Univerzita v Liberci, 2016 ISBN: 978-80-7494-316-4.
- BOBEK, J., SEIDL, M., HABR, J. , and ŠAFKA, J. Mechanical properties of metal-plastic composite with internal fractal shape reinforcing structure Defect and Diffusion Forum 368. ed. Trans Tech Publications Ltd, 2016 P. 170 – 173. ISBN: 978-303835720-9, ISSN: 1012-0386.
- BOBEK, J. et al. New Silane and MAPP Coupling Agents as Natural Composites Production Systems Improvement Key Engineering Materials 1. ed. Trans Tech Publications Ltd, 2016 P. 52 – 59. ISBN: 978-3-03835-629-5, ISSN: 1013-9826. http://www.scientific.net/KEM.669.52
- SEIDL, M. et al. Observation of impact of progressive cooling system on temperature field distributions on surfaces of injection moulded plastic parts Key Engineering Materials, Vol. 669 1. ed. Pfaffikon, Switzerland: Trans Tech Publications, 2016 P. 19 – 28. ISBN: 978-3-03835-629-5, ISSN: 1013-9826.
- BĚHÁLEK, L. et al. Physical-mechanical properties of hollow glass microspheres filled polypropylene composites for injection moulding Key Engineering Materials 1. ed. Pfaffikon: Trans Tech Publications Ltd, 2016 P. 3 – 10. ISBN: 978-3-03835-629-5, ISSN: 1013-9826. http://www.scientific.net/KEM.669.3
- HABR, J. et al. Polymerní kompozit s přírodními vlákny a lehčenou matricí [utility model] Enlisted at 20160614 as No. 29526.
- BĚHÁLEK, L., SEIDL, M. , and HABR, J. Possibility to detect degraded recycled material in the moulded parts from PP MM Science Journal Praha: MM publishing Ltd., 2016, vol. 2016, issue September. P. 989 – 993. ISSN: 1803-1269. http://www.mmscience.eu/content/file/archives/MM_Science_201656.pdf
- SEIDL, M., BĚHÁLEK, L., HABR, J. , and SEHNOUTEK, P. The deformation behaviour of hybrid composite systems with thermoplastic matrixitle MM Science Journal 1. ed. Praha: MM publishing Ltd., 2016, vol. 2016, issue September. P. 1014 – 1020. ISSN: 1803-1269. http://www.mmscience.eu/content/file/archives/MM_Science_201668.pdf
- BĚHÁLEK, L. et al. Thermal degradation of the thermoplastic Elastomers during the injection Moulding process Materials Science Forum Pfaffikon: Trans Tech Publications Ltd, 2016 P. 148 – 155. ISBN: 978-3-03835-728-5, ISSN: 0255-5476.
- HABR, J. et al. Two component parts hardness optimization regarding production systems Key Engineering Materials Pfaffikon, Switzerland: Trans Tech Publications Ltd, 2016 P. 44 – 51. ISBN: 978-3-03835-720-9, ISSN: 1013-9826.
- ŠAFKA, J. et al. Use of composite materials for FDM 3D print technology Materials Science Forum 862. ed. Switzerland: Trans Tech Publications, 2016 P. 174 – 181. ISSN: 0255-5476.
- SEIDL, M. et al. Utilizing of inner porous structure in injection moulds for application of special cooling method Journal of Physics: Conference Series 1. ed. Institute of Physics Publishing, 2016 P. neuvedeny (5 stran). ISSN: 1742-6596. http://iopscience.iop.org/article/10.1088/1742-6596/709/1/012003/pdf
2015
- NOVÁKOVÁ, I. et al. Konstrukční modifikace tenkých tvarových částí tlakové licí formy pro chlazení pomocí kapalného CO2 [utility model] Enlisted at 20150310 as No. 27907. http://spisy.upv.cz/UtilityModels/FullDocuments/FDUM0027/uv027907.pdf
- JÍLEK, B., SEIDL, M. , and NOVÁKOVÁ, I. Konstrukční úprava tvarové desky vstřikovací formy pro vyměnitelná tvarová jádra [utility model] Enlisted at 20151102 as No. 28766. http://spisy.upv.cz/UtilityModels/FullDocuments/FDUM0028/uv028766.pdf
- VYSLOUŽILOVÁ, L. et al. Nanofibrous filters for respirators Advanced Material Research 1. ed. Švýcarsko: Trans Tech Publications, 2015 P. 126 – 131. ISSN: 1662-8985. http://www.scientific.net/AMR.1119.126
- LENFELD, P. et al. Ochranná dýchací maska se společným nádechovým a výdechovým otvorem [utility model] Enlisted at 20150206 as No. 27784. http://spisy.upv.cz/UtilityModels/FullDocuments/FDUM0027/uv027784.pdf
- LENFELD, P. et al. Ochranná dýchací maska se společným nádechovým a výdechovým otvorem [patent] Granted at 20151223 as No. 305677. http://spisy.upv.cz/Patents/FullDocuments/305/305677.pdf
- SEIDL, M. et al. Optimization of snap-fit designs with rapid prototype technology support MM Science Journal 1. ed., 2015, vol. 2015, issue DECEMBER. P. 813 – 817. ISSN: 1805-0476. http://www.mmscience.eu/content/file/MM_Science_201421.pdf
- BĚHÁLEK, L. et al. Physical-mechanical properties of biocomposites reinforced with coir (nano)fibers NANOCON 2014, 6th International conference 1. ed. Brno: Tanger s.r.o., 2015 P. 610 – 614. ISBN: 978-80-87294-53-6. http://www.nanocon.eu
- SEIDL, M. , and ŠEVČÍK, L. Rovinný filtr s tvarově nestabilním filtračním materiálem obsahujícím vrstvu nanovláken [patent] Granted at 20151223 as No. 305678. http://spisy.upv.cz/Patents/FullDocuments/305/305678.pdf
- SEIDL, M. Technologie chlazení vstřikovací formy pomocí kapalného CO2 [ověřená technologie]. 2015.
- NOVÁKOVÁ, I., SEIDL, M. , and MORAVEC, J. The Application of Liquid CO2 into the Die Casting Mould Tempering System Unitech 2015 1. ed. Gabrovo: Technical university of Gabrovo, 2015 P. 93 – 97. ISSN: 1313-230X.
2014
- ŠAFKA, J., BOBEK, J., HABR, J. , and SEIDL, M. 3D Printing of Fractal Deterministic Shapes Into Polymer Matrix with Respect to Final Composite Mechanical Properties Applied Mechanics and Materials 693. ed. Pfaffikon, Switzerland: Trans Tech Publications Ltd, 2014 P. 207 – 212. ISBN: 978-3-03835-313-3, ISSN: 1660-9336.
- NOVÁKOVÁ, I. et al. Application of cooling by liquid CO2 for the die casting moulds core Manufacturing technology 1. ed., 2014, vol. 14, issue 4. P. 585 – 590. ISSN: 1213-2489.
- BĚHÁLEK, L., SEIDL, M. , and DOBRÁNSKY, J. Crystallization of polylactic acid composites with banana and hemp fibres by means of DSC and XRD methods Applied Mechanics and Materials 1. ed. Pfaffikon: Trans Tech Publications, 2014 P. 325 – 332. ISBN: 978-3-03835-201-3, ISSN: 1660-9336. http://www.scientific.net/AMM.616.325
- SEIDL, M., LACHMAN, M., ŠAFKA, J. , and ZELENÝ, P. Dividing the Complicated General Shapes of the Surface Into Partial Elements According to Curvature (gauss and Maximal Curvature) and Its Multi-axis Machining Applied Mechanics and Materials 693. ed. Pfaffikon, Switzerland: Trans Tech Publications Ltd, 2014 P. 225 – 230. ISBN: 978-3-03835-313-3, ISSN: 1660-9336.
- LENFELD, P. et al. Influence of the type of additives on the properties of polymer nanocomposites with fillers based on highly pure cellulose NANOCON 2013, 5TH INTERNATIONAL CONFERENCE 1. ed. Brno: Tanger s.r.o., 2014 P. 77 – 82. ISBN: 978-80-87294-47-5.
- SEIDL, M., NOVÁKOVÁ, I. , and BRDLÍK, P. Měřící zařízení k hodnocení účinnosti chlazení zkapalněnými plyny [utility model] Enlisted at 20141208 as No. 27565.
- BĚHÁLEK, L. et al. Study of Crystallization of Polylactic Acid Composites And Nanocomposites with Natural Fibres by DSC Methodas 5th NANOCON International Conference 1. ed. Brno: Tanger s.r.o., 2014 P. 746 – 751. ISBN: 978-80-87294-47-5.
- BRDLÍK, P., SEIDL, M. , and NOVÁKOVÁ, I. Úprava laboratorních pecí zpřístupňující jejich pracovní prostor pro přímé měření fyzikálních veličin či chemického složení vzorků nebo transport látek během všech fází ohřevu. [utility model] Enlisted at 20140317 as No. 26635. http://spisy.upv.cz/UtilityModels/FullDocuments/FDUM0026/uv026635.pdf
2013
- LENFELD, P., BOBEK, J. , and SEIDL, M. Anti-dust filters [industrial model] Enlisted at 20131111 as No. 002332650-0001. http://isdv.upv.cz/portal/pls/portal/portlets.vzs.det?xprim=90023326500001&lan=cs&s_majs=&s_puvo=&s_naze=
- LENFELD, P., BOBEK, J. , and SEIDL, M. Anti-dust filters [industrial model] Enlisted at 20131111 as No. 002332650-0002. http://isdv.upv.cz/portal/pls/portal/portlets.vzs.det?xprim=90023326500002&lan=cs&s_majs=&s_puvo=&s_naze=