Publikace Oddělení konstrukce strojů

2024

PETRŮ, M. a RAHIMIAN KOLOOR, S. S. 3D Printing and Implementation of Engineered Cementitious Composites - A Review CASE STUDIES IN CONSTRUCTION MATERIALS London: Elsevier, 2024, roč. 21, č. 2024. S. neuvedeny (28 stranky). ISSN: 2214-5095. https://www.sciencedirect.com/science/article/pii/S2214509524006132?pes=vor

AMOR, N. aj. Advances in heat exchangers for heat and mass transfer: a review The Journal of The Textile Institute Taylor & Francis, 2024 S. neuvedeny (15 stran). ISSN: 0040-5000. https://www.tandfonline.com/doi/full/10.1080/00405000.2024.2311226?scroll=top&needAccess=true

PETRŮ, M. a RAHIMIAN KOLOOR, S. S. Advances in silicon nitride ceramic biomaterials for dental applications – A review Journal of Materials Research and Technology Elsevier, 2024, roč. 28, č. 2024. S. neuvedeny (14 stran). ISSN: 2238-7854. https://www.sciencedirect.com/science/article/pii/S2238785423032507?pes=vor

PETRŮ, M. aj. Advances in silicon nitride ceramic biomaterials for dental applications – A review Journal of Materials Research and Technology Amsterdam: Elsevier, 2024, roč. 28, č. EARLY ACCESS. S. 2778 – 2791. ISSN: 2238-7854. https://www.sciencedirect.com/science/article/pii/S2238785423032507?pes=vor

MAHMOOD, A. aj. Aging Behaviour Assessment of Cellulosic Fibres in Alkaline Media: A Green Technology Approach in Construction Materials Journal of building engineering Amsterdam: Elsevier, 2024, roč. 92, č. September. S. neuvedeny (19 stran). ISSN: 2352-7102. https://www.sciencedirect.com/science/article/pii/S2352710224012531

RAHIMIAN KOLOOR, S. S. Analytical investigation of asymmetric forced vibration behavior of functionally graded porous plates with structural damping MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES PHILADELPHIA: TAYLOR & FRANCIS INC, 2024, roč. 52, č. 4. S. 2749 – 2774. ISSN: 1539-7734. https://www.tandfonline.com/doi/full/10.1080/15397734.2023.2189985

AHMAD, S. aj. Cumulative fretting fatigue damage model for steel wire ropes Fatigue and Fracture of Engineering Materials and Structures Hoboken: John Wiley and Sons Inc, 2024, roč. 47, č. 5. S. 21. ISSN: 8756-758X. https://onlinelibrary.wiley.com/doi/epdf/10.1111/ffe.14264

MUSADDAQ, A., SHAHID, M., PETRŮ, M. a MAŠÍN, I. Design and development of textile-based wearable sensors for real-time biomedical monitoring; a review The Journal of The Textile Institute, 2024 S. neuvedeny (16 stran). ISSN: 1754-2340. https://www.tandfonline.com/doi/pdf/10.1080/00405000.2024.2318500

AMOR, N. aj. Design and optimization of machinability of ZnO embedded-glass fiber reinforced polymer composites with a modified white shark optimizer Expert Systems with Applications AMSTERDAM: Elsevier, 2024, roč. 237, č. MAR 1. S. neuvedeny (12 stran). ISSN: 0957-4174. https://www.sciencedirect.com/science/article/pii/S0957417423019760

AMOR, N., NOMAN, M. T. a PETRŮ, M. Design and optimization of machinability of ZnO embedded-glass fiber reinforced polymer composites with a modified white shark optimizer Expert Systems with Applications Oxford: Elsevier, 2024, roč. 237, č. 1. S. 1 – 12. ISSN: 0957-4174. https://www.sciencedirect.com/science/article/pii/S0957417423019760?via%3Dihub

MUSADDAQ, A. aj. Efficient fog collector with superhydrophobic coated surface Journal of the Textile Institute Oxon: Taylor & Francis, 2024, roč. 115, č. 7. S. 1048 – 1058. ISSN: 0040-5000. https://www.tandfonline.com/doi/full/10.1080/00405000.2023.2207760

PETRŮ, M., NOMAN, M. T., XIAOMENG, W. a GUOZHENG, K. Enhancing dynamic viscoelastic performance of flax fiber/fly ash hollow cenosphere-reinforced composites coated by in situ fabrication of ultrasonically synthesized nanotitanium dioxide Journal of Applied Polymer Science WILEY, 2024, roč. 141, č. 33. S. neuvedeny (14 stran). ISSN: 0021-8995. https://doi.org/10.1002/app.55843

AMOR, N. aj. Machining performance of TiO2 embedded-glass fiber reinforced composites with snake optimizer MEASUREMENT London: Elsevier, 2024, roč. 227, č. 3. S. 1 – 16. ISSN: 0263-2241. https://www.sciencedirect.com/science/article/pii/S0263224124001374?via%3Dihub

NOMAN, M. T., AMOR, N. a PETRŮ, M. Polymer-Based Composites for Sorption, Energy Storage and Sensing Applications Separation and Purification Reviews Londýn: Taylor and Francis, 2024, roč. 2024, č. 11. S. neuvedeny ( stran). ISSN: 1542-2119. https://www.tandfonline.com/doi/full/10.1080/15422119.2024.2431209

MUSADDAQ, A. aj. Positive impacts of plasma treatment on comfort properties of textile blends Advances in Plasma Treatment of Textile Surfaces 1. vyd. Oxford: Elsevier, 2024 S. 367 – 385. ISBN: 978-0-443-19079-7.https://www.sciencedirect.com/book/9780443190797/advances-in-plasma-treatment-of-textile-surfaces

LE VAN, S. a SETLAK, K. Revolutionizing Construction Safety with Geopolymer Composites: Unveiling Advanced Techniques in Manufacturing Sandwich Steel Structures Using Formwork-Free Spray Technology Coatings {ISSN: 2079-6412} Basel: MDPI, 2024, roč. 14, č. 1. S. neuvedeny (17 stran). ISSN: 2079-6412. https://www.mdpi.com/2079-6412/14/1/146

PETRŮ, M., VOSÁHLO, J. a RAHIMIAN KOLOOR, S. S. The role of urethane acrylate in improving the elasticity of nano chitosan UV-curable hydrogel nanocomposite Nano-Structures & Nano-Objects Londýn: Elsevier, 2024, roč. 2024, č. 39. S. 1 – 9. ISSN: 2352-507X. https://www.sciencedirect.com/science/article/pii/S2352507X2400204X

2023

ALI, A. aj. A comparative performance of antibacterial effectiveness of copper and silver coated textiles Journal of Industrial Textiles SAGE PUBLICATIONS INC, 2023, roč. 53, č. AUG. S. neuvedeny (10 stran). ISSN: 1528-0837. https://journals.sagepub.com/doi/10.1177/15280837221134990

AMOR, N. aj. A review on computational intelligence methods for modeling of light weight composite materials Applied Soft Computing AMSTERDAM: Elsevier, 2023, roč. 147, č. 11. S. neuvedeny (21 stranky). ISSN: 1568-4946. https://www.sciencedirect.com/science/article/pii/S156849462300830X

MANSOR, M. A., AHMAD, M. R., PETRŮ, M. a RAHIMIAN KOLOOR, S. S. An impedance flow cytometry with integrated dual microneedle for electrical properties characterization of single cell Artificial Cells, Nanomedicine, and Biotechnology OXON: Taylor and Francis, 2023, roč. 51, č. 1. S. 371 – 383. ISSN: 2169-1401. https://www.tandfonline.com/doi/full/10.1080/21691401.2023.2239274

MOHAMMADI, H. aj. An insight from nature: Honeycomb pattern in advanced structural design for impact energy absorption Journal of Materials Research and Technology AMSTERDAM: Elsevier, 2023, roč. 22, č. 1-2. S. 2862 – 2887. ISSN: 2238-7854. https://www.sciencedirect.com/science/article/pii/S2238785422019524?via=ihub

ALAVI, S. K., AYATOLLAHI, M. R., YAHYA, M. Y. a RAHIMIAN KOLOOR, S. S. Analytical investigation of asymmetric forced vibration behavior of functionally graded porous plates with structural damping MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES PHILADELPHIA: Taylor and Francis, 2023 S. neuvedeny (26 stranky). ISSN: 1539-7734. https://www.tandfonline.com/doi/full/10.1080/15397734.2023.2189985

ALI, A., RAHIMIAN KOLOOR, S. S., ALSHEHRI, A. H. a AROCKIARAJAN, A. Carbon nanotube characteristics and enhancement effects on the mechanical features of polymer-based materials and structures – A review Journal of Materials Research and Technology Amsterdam: Elsevier, 2023, roč. 24, č. 5-6. S. 6495 – 6521. ISSN: 2238-7854. https://www.sciencedirect.com/science/article/pii/S2238785423007652?pes=vor

ŠEVČÍK, L. a RYVOLOVÁ, M. Design of Load Carrier Composite Reinforcement of Zero Generation of an Electric Car Frame Proceedings of the 61st International Conference of Machine Design Departments, 2023 S. neuvedeny (7 stran). ISBN: 978-94-6463-182-1, ISSN: 2589-4943. https://www.atlantis-press.com/proceedings/icmd-20/125987569

MAHMOOD, A. aj. Energy efficient industrial and textile waste for the fabrication of cementitious composites: a review The Journal of The Textile Institute ABINGDON: Taylor & Francis, 2023 S. neuvedeny (17 stran). ISSN: 0040-5000. https://www.tandfonline.com/doi/full/10.1080/00405000.2023.2220515

USAMA, I. aj. Finite element analysis of car frame frontal crash using lightweight materials Journal of Engineering Research Khaldiya: Academic Publication Council, 2023, roč. 11, č. 1. S. neuvedeny (9 stran). ISSN: 2307-1877. https://www.researchgate.net/publication/367530850_Finite_element_analysis_of_car_frame_frontal_crash_using_lightweight_materials

MAŠÍN, I., JANDURA, P., SLÁMOVÁ, Z. a SOJÁK, P. Forma pro tvarování skleněných bižuterních komponent z recyklátu [užitný vzor] Zapsán 20230925 pod číslem 37336.

LAZAROV, A. aj. Funkční vzorek jednoduchého vakuového efektoru s jednou přísavkou a customizovaným dílem vyrobeným 3D tiskem [funkční vzorek]

MAŠÍN, I. aj. Funkční vzorek kompletu skleněné bižuterie pro cirkulární ekonomiku se SMART komponentou [funkční vzorek]

SRB, P., VOSÁHLO, J. a MAZAČ, M. Funkční vzorek měřicího přípravku pro kabelové lávky a žlaby. [funkční vzorek]

MAŠÍN, I., JANDURA, P., SLÁMOVÁ, Z. a SOJÁK, P. Funkční vzorek skleněné perly obsahující recyklát z kompozitního materiálu [funkční vzorek]

AKRAM, W. aj. Hydroxyapatite Coating for Control Degradation and Parametric Optimization of Pure Magnesium: An Electrophoretic Deposition Technique for Biodegradable Implants Journal of Materials Research and Technology Amsterdam: Elsevier, 2023, roč. 26, č. SEP. S. neuvedeny (26 stranky). ISSN: 2238-7854. https://www.sciencedirect.com/science/article/pii/S2238785423018379

MAŠÍN, I. a JANDURA, P. IoT for Industry 4.0: performance monitoring in manual production Advanced Signal Processing for Industry 4.0, Volume 2 1. vyd. Bristol, UK: IOP Publishing Ltd, 2023 S. 1 – 29. ISBN: 978-0-7503-5656-5.https://iopscience.iop.org/book/edit/978-0-7503-5658-9

BAHRAMI, B., MEHRABAN, M. R., RAHIMIAN KOLOOR, S. S. a AYATOLLAHI, M. R. Non-local and local criteria based on the extended finite element method (XFEM) for fracture simulation of anisotropic 3D-printed polymeric components RAPID PROTOTYPING JOURNAL YORKSHIRE: Emerald, 2023, roč. 29, č. 8. S. 1742 – 1756. ISSN: 1355-2546. https://www.emerald.com/insight/content/doi/10.1108/RPJ-12-2022-0431/full/html

ALAVI, S. K., AYATOLLAHI, M. R., YAHYA, M. Y. a RAHIMIAN KOLOOR, S. S. On the asymmetric dynamic response of viscoelastic sector plate made of FG polymer foam THIN-WALLED STRUCTURES OXFORD: Elsevier, 2023, roč. 187, č. 7. S. neuvedeny (15 stran). ISSN: 0263-8231. https://www.sciencedirect.com/science/article/pii/S0263823123002033?via=ihub

NEETHU, S. aj. Porous hematite embedded C and Fe codoped graphitic carbon nitride for electrochemical detection of pineal gland hormone melatonin Materials Today Chemistry OXFORD: Elsevier, 2023, roč. 29, č. 4. S. neuvedeny (12 stran). ISSN: 2468-5194. https://www.sciencedirect.com/science/article/pii/S2468519423000332?via=ihub

GHANDVAR, H. aj. Role of YSZ Particles on Microstructural, Wear, and Corrosion Behaviour of Al-15%Mg2Si Hybrid Composite for Marine Applications Journal of Marine Science and Engineering MDPI, 2023, roč. 11, č. 5. S. neuvedeny (18 stran). ISSN: 2077-1312. https://www.mdpi.com/2077-1312/11/5/1050

JANDURA, P., SRB, P. a VOSÁHLO, J. Stavitelná nosná rámová konstrukce pro 3D scanner - funkční vzorek [funkční vzorek]

SIDDIQUE, H. F. aj. Study on tensile properties of compression SOCKS ankle cut-strips at practical extension Journal of Industrial Textiles THOUSAND OAKS: SAGE PUBLICATIONS INC, 2023, roč. 53, č. APR. S. neuvedeny (23 stranky). ISSN: 1528-0837. https://journals.sagepub.com/doi/full/10.1177/15280837231170305

AZEMATI, A. aj. Thermal evaluation of a room coated by thin urethane nanocomposite layer coating for energy-saving efficiency in building applications Case Studies in Thermal Engineering AMSTERDAM: Elsevier, 2023, roč. 43, č. 3. S. neuvedeny (11 stran). ISSN: 2214-157X. https://www.sciencedirect.com/science/article/pii/S2214157X2200925X?pes=vor

ASGHARI, Y., MOHAMMADYAN-YASOUJ, S. E. a RAHIMIAN KOLOOR, S. S. Utilization of metakaolin on the properties of self-consolidating concrete: A review Construction and Building Materials Londýn: Elsevier, 2023, roč. 389, č. 7. S. neuvedeny (24 stranky). ISSN: 0950-0618. https://www.sciencedirect.com/science/article/pii/S0950061823013181?via=ihub

ŠEVČÍK, L., SRB, P., TŮMA, P. a VOSÁHLO, J. Zařízení na měření celistvosti pryžo-kordových vulkanizovaných profilů [funkční vzorek]

2022

PETRŮ, M. a BEHERA, P. K. 3D Woven Textile Structural Polymer Composites: Effect of Resin Processing Parameters on Mechanical Performance Polymers MDPI, 2022, roč. 14, č. 6. S. neuvedeny (25 stranky). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/14/6/1134

WANG, Y. aj. A facile approach to develop multifunctional cotton fabrics with hydrophobic, self-cleaning and UV protection properties using ZnO particles and fluorocarbon Journal of the Textile Institute ABINGDON: Taylor & Francis, 2022, roč. 113, č. 10. S. 2238 – 2248. ISSN: 0040-5000. https://www.tandfonline.com/doi/full/10.1080/00405000.2021.1975905

MOEZZI, R. a RAHIMIAN KOLOOR, S. S. A Numerical Study of the effect of Bolt Thread Geometry on the Load Distribution of Continuous Threads Journal of Engineering Research University of Kuwait, 2022, roč. 10, č. 2 B. S. 158 – 173. ISSN: 2307-1877. https://kuwaitjournals.org/jer/index.php/JER/article/view/9785

BALRAM, D. aj. A sensitive and economical electrochemical platform for detection of food additive tert-butylhydroquinone based on porous Co3O4 nanorods embellished chemically oxidized carbon black FOOD CONTROL ELSEVIER SCI LTD, 2022, roč. 136, č. JUN. S. neuvedeny (11 stran). ISSN: 0956-7135. https://www.sciencedirect.com/science/article/pii/S0956713522000378?via=ihub

YANG, T. aj. Acoustical Evaluation and Comparative Study of Maple Leaves and Coir and Polyester Fibers Journal of Natural Fibers PHILADELPHIA: Taylor & Francis, 2022, roč. 19, č. 15. S. 10813 – 10818. ISSN: 1544-0478. https://www.tandfonline.com/doi/full/10.1080/15440478.2021.2002770

YANG, T. aj. AFDeter: A MATLAB-based tool for simple and rapid determination of the structural parameters and the airflow-related properties of fibrous materials SOFTWAREX Elsevier, 2022, roč. 20, č. 12. S. neuvedeny (6 stran). ISSN: 2352-7110. https://www.sciencedirect.com/science/article/pii/S2352711022001315?pes=vor

MOHAMMADI, H. aj. An insight from nature: honeycomb pattern in advanced structural design for impact energy absorption BIOORGANIC CHEMISTRY ACADEMIC PRESS INC ELSEVIER SCIENCE, 2022, roč. 123, č. JUN. S. 2862 – 2887. ISSN: 0045-2068. https://www.sciencedirect.com/science/article/pii/S2238785422019524?via=ihub

BALRAM, D. aj. Bi-functional renewable biopolymer wrapped CNFs/Ag doped spinel cobalt oxide as a sensitive platform for highly toxic nitroaromatic compound detection and degradation Chemosphere PERGAMON-ELSEVIER SCIENCE LTD, 2022, roč. 291, č. 2. S. neuvedeny (12 stran). ISSN: 0045-6535. https://www.sciencedirect.com/science/article/pii/S0045653521034706?via=ihub

AMOR, N., NOMAN, M. T., PETRŮ, M. a NEETHU, S. Comfort evaluation of ZnO coated fabrics by artificial neural network assisted with golden eagle optimizer model Scientific Reports NATURE PORTFOLIO, 2022, roč. 12, č. 1. S. neuvedeny (16 stran). ISSN: 2045-2322. https://www.nature.com/articles/s41598-022-10406-6.pdf

DENG, M. aj. Construction of Novel Electro-Fenton Systems by Magnetically Decorating Zero-Valent Iron onto RuO2-IrO2/Ti Electrode for Highly Efficient Pharmaceutical Wastewater Treatment Water MDPI, 2022, roč. 14, č. 7. S. neuvedeny (19 stran). ISSN: 2073-4441. https://www.mdpi.com/2073-4441/14/7/1044

NEJAD, A. F. aj. Crashworthiness Assessment of Carbon/Glass Epoxy Hybrid Composite Tubes Subjected to Axial Load Polymers MDPI, 2022, roč. 14, č. 19. S. neuvedeny (15 stran). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/14/19/4083

KARIMZADEH, A. aj. Damage characterization of dental nanocomposite adhesive in orthodontic treatment applications INTERNATIONAL JOURNAL OF DAMAGE MECHANICS London: SAGE, 2022, roč. 31, č. 9. S. 1299 – 1319. ISSN: 1056-7895. https://journals.sagepub.com/doi/10.1177/10567895221088027

NEJAD, A. F. aj. Design of a novel creep testing machine to investigate the creep life history of austenitic steel foil at elevated temperature FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES WILEY, 2022, roč. 45, č. 9. S. 2563 – 2575. ISSN: 8756-758X. https://onlinelibrary.wiley.com/doi/10.1111/ffe.13769

YANG, T. aj. Determination of the permeability coefficient and airflow resistivity of nonwoven materials Textile Research Journal London: Sage Publications, 2022, roč. 92, č. 1-2. S. 126 – 142. ISSN: 0040-5175. https://journals.sagepub.com/doi/full/10.1177/00405175211029212

ALI, A. aj. Development of silver plated electrically conductive elastomers embedded with carbon black particles obtained from Kevlar waste source Polymer Testing Oxford: Elsevier, 2022, roč. 116, č. 12. S. neuvedeny (13 stran). ISSN: 0142-9418. https://www.sciencedirect.com/science/article/pii/S0142941822003142?pes=vor

PETRŮ, M. a RAHIMIAN KOLOOR, S. S. Displacement rate effects on mixed-mode I/II delamination of laminated carbon/epoxy composites Polymer Testing Elsevier, 2022, roč. 108, č. 4. S. neuvedeny (11 stran). ISSN: 0142-9418. https://www.sciencedirect.com/science/article/pii/S014294182200040X

LOW, K. O. aj. Displacement rate effects on mixed-mode I/II delamination of laminated carbon/epoxy composites Polymer Testing Elsevier, 2022, roč. 108, č. 4. S. neuvedeny (11 stran). ISSN: 0142-9418. https://www.sciencedirect.com/science/article/pii/S014294182200040X?via=ihub

ZAIB, M. A. aj. Effect of Blade Diameter on the Performance of Horizontal-Axis Ocean Current Turbine Energies MDPI, 2022, roč. 15, č. 15. S. neuvedeny (13 stran). ISSN: 1996-1073. https://www.mdpi.com/1996-1073/15/15/5323

WANG, S. aj. Enhanced Methylene Blue Adsorption by Cu-BTC Metal-Organic Frameworks with Engineered Particle Size Using Surfactant Modulators Water MDPI, 2022, roč. 14, č. 12. S. neuvedeny (15 stran). ISSN: 2073-4441. https://www.mdpi.com/2073-4441/14/12/1864

YANG, T. aj. Experimental and Modelling Studies on Thermal Insulation and Sound Absorption Properties of Cross-Laid Nonwoven Fabrics Autex Research Journal WARSAW: SCIENDO, 2022, roč. 22, č. 3. S. 264 – 271. ISSN: 1470-9589. https://sciendo.com/article/10.2478/aut-2021-0012

HASHMI, M. H., RAHIMIAN KOLOOR, S. S., ABDUL-HAMID, M. F. a TAMIN, M. N. Exploiting fractal features to determine fatigue crack growth rates of metallic materials ENGINEERING FRACTURE MECHANICS PERGAMON-ELSEVIER SCIENCE LTD, 2022, roč. 270, č. JUL. S. neuvedeny (15 stran). ISSN: 0013-7944. https://www.sciencedirect.com/science/article/pii/S0013794422003228?via=ihub

SHAH, I. A. aj. Finite Element Analysis of the Ballistic Impact on Auxetic Sandwich Composite Human Body Armor Materials MDPI, 2022, roč. 15, č. 6. S. neuvedeny (16 stran). ISSN: 1996-1944. https://www.mdpi.com/1996-1944/15/6/2064

HASHMI, M. H., RAHIMIAN KOLOOR, S. S., ABDUL-HAMID, M. F. a TAMIN, M. N. Fractal Analysis for Fatigue Crack Growth Rate Response of Engineering Structures with Complex Geometry FRACTAL AND FRACTIONAL MDPI, 2022, roč. 6, č. 11. S. neuvedeny (12 stran). ISSN: 2504-3110. https://www.mdpi.com/2504-3110/6/11/635

NEETHU, S. aj. Functionalization of CNFs surface with beta-cyclodextrin and decoration of hematite nanoparticles for detection and degradation of toxic fungicide carbendazim Applied Surface Science ELSEVIER, 2022, roč. 586, č. JUN. S. neuvedeny (12 stran). ISSN: 0169-4332. https://www.sciencedirect.com/science/article/pii/S0169433222002483?via=ihub

SRB, P., MAZAČ, M., SIERATOVSKI, J. a MAŠÍN, I. Funkční vzorek etiketovací jednotky pro SMART packaging [funkční vzorek]

PETRŮ, M. aj. Funkční vzorek kompozitního rámu modulární elektromobilní platformy [funkční vzorek]

ZHANG, L. aj. High Performance Flexible Strain Sensors Based On Silver Nanowires/thermoplastic Polyurethane Composites for Wearable Devices Applied Composite Materials Springer, 2022, roč. 29, č. 4. S. 1621–1636. ISSN: 0929-189X. https://link.springer.com/article/10.1007/s10443-022-10029-0

MILITKÝ, J. aj. Highly stretchable durable electro-thermal conductive yarns made by deposition of carbon nanotubes Journal of the Textile Institute 1. vyd. OXON: Taylor and Francis, 2022, roč. 113, č. 1. S. 80 – 89. ISSN: 0040-5000. https://www.tandfonline.com/doi/full/10.1080/00405000.2020.1863569?needAccess=true

MAŠÍN, I., MARTINEC, T., BUCHTA, J. a MALENA, V. Inteligentní plynový ohřívač vzduchu [funkční vzorek]

PETRÍK, S. aj. Kompozitní struktura (demonstrátor) se zabudovanými vodivými kompozitními páskami (VKP) [funkční vzorek]

KUMAR, S. aj. Mechanical and Morphological Characterizations of Laminated Object Manufactured 3D Printed Biodegradable Poly(lactic)acid with Various Physical Configurations Journal of Marine Science and Engineering MDPI, 2022, roč. 10, č. 12. S. neuvedeny (23 stranky). ISSN: 2077-1312. https://www.mdpi.com/2077-1312/10/12/1954

PETRŮ, M. aj. Modulární platforma pro autonomní podvozky specializovaných elektrovozidel pro dopravu nákladu a zařízení - Generace 0 [funkční vzorek]

VOŽENÍLEK, R. aj. Modulární platforma pro autonomní podvozky specializovaných elektrovozidel pro dopravu nákladu a zařízení - Generace 1 [funkční vzorek]

NEETHU, S. aj. Nanomolar detection of food additive tert-butylhydroquinone in edible oils based on novel ternary metal oxide embedded beta-cyclodextrin functionalized carbon black FOOD CHEMISTRY ELSEVIER SCI LTD, 2022, roč. 377, č. MAY. S. neuvedeny (10 stran). ISSN: 0308-8146. https://www.sciencedirect.com/science/article/pii/S0308814621028739?via=ihub

ALAVI, S. K., AYATOLLAHI, M. R., PETRŮ, M. a RAHIMIAN KOLOOR, S. S. On the dynamic response of viscoelastic functionally graded porous plates under various hybrid loadings OCEAN ENGINEERING Oxford: Elsevier, 2022, roč. 264, č. 11. S. neuvedeny (13 stran). ISSN: 0029-8018. https://www.sciencedirect.com/science/article/pii/S0029801822018248?via=ihub

NOROUZTABAR, R. aj. On the Performance of a Modified Triple Stack Blade Savonius Wind Turbine as a Function of Geometrical Parameters Sustainability MDPI, 2022, roč. 14, č. 16. S. neuvedeny (26 stranky). ISSN: 2071-1050. https://www.mdpi.com/2071-1050/14/16/9816

AHMED, S. aj. Optimization of Process Parameters in Friction Stir Welding of Aluminum 5451 in Marine Applications Journal of Marine Science and Engineering MDPI, 2022, roč. 10, č. 10. S. neuvedeny (13 stran). ISSN: 2077-1312. https://www.mdpi.com/2077-1312/10/10/1539

MARTINEC, T. aj. Plynový ohřívač vzduchu a topný systém obsahující alespoň jeden takový plynový ohřívač vzduchu [užitný vzor] Zapsán 20220607 pod číslem 36118. https://isdv.upv.cz/doc/FullFiles/UtilityModels/FullDocuments/FDUM0036/uv036118.pdf

REMADEVI JAYAN, V. aj. Prediction of internal geometry and tensile behavior of 3D woven solid structures by mathematical coding Journal of Industrial Textiles SAGE PUBLICATIONS INC, 2022, roč. 51, č. 4. S. 7034S – 7055S. ISSN: 1528-0837. https://journals.sagepub.com/doi/abs/10.1177/15280837211001348

ISRAR, H. A. aj. Preliminary Structural Design of Coreless Spoiler by Topological Optimization Processes MDPI, 2022, roč. 10, č. 10. S. neuvedeny (14 stran). ISSN: 2227-9717. https://www.mdpi.com/2227-9717/10/10/2076

TAN, X. aj. Preparation and Characterization of Corn Husk Nanocellulose Coating on Electrospun Polyamide 6 Alexandria Engineering Journal Amsterdam: ELSEVIER, 2022, roč. 61, č. 6. S. 4529 – 4540. ISSN: 1110-0168. https://doi.org/10.1016/j.aej.2021.10.011

XIONG, X. aj. Preparation and Characterization of Electrosprayed Aerogel/Polytetrafluoroethylene Microporous Materials Polymers Basel: MDPI, 2022, roč. 14, č. 1. S. 1 – 14. ISSN: 2073-4360. https://www.mdpi.com/2073-4360/14/1/48

FARID, A. A., SHEN, F. S., RAHIMIAN KOLOOR, S. S. a PETRŮ, M. Quality evaluation of aluminum-AA6061 truncated cone deformed by single point incremental forming Journal of the Brazilian Society of Mechanical Sciences and Engineering Springer, 2022, roč. 44, č. 9. S. neuvedeny (9 stran). ISSN: 1678-5878. https://link.springer.com/content/pdf/10.1007/s40430-022-03730-5.pdf

NEETHU, S. aj. Silver doped dodecahedral metal organic framework anchored RGO nanosheets for nanomolar quantification of priority toxic pollutant in aquatic environment Journal of Alloys and Compounds ELSEVIER SCIENCE SA, 2022, roč. 922, č. NOV. S. neuvedeny (12 stran). ISSN: 0925-8388. https://www.sciencedirect.com/science/article/pii/S0925838822025713?via=ihub

YANG, T. aj. Simple determination of key structural parameters for fibrous materials enabled by Ergun-Type and Kozeny-type equations Polymer Testing Elsevier, 2022, roč. 108, č. 4. S. neuvedeny (12 stran). ISSN: 0142-9418. https://www.sciencedirect.com/science/article/pii/S0142941822000423

YANG, T. aj. Sound Absorption Properties and Accuracy of Prediction Models on Natural Fiber Based Nonwoven Materials Journal of Natural Fibers PHILADELPHIA: Taylor & Francis, 2022, roč. 19, č. 15. S. 10588 – 10600. ISSN: 1544-0478. https://www.tandfonline.com/doi/full/10.1080/15440478.2021.2002755

RAHIMIAN KOLOOR, S. S., PETRŮ, M., ALAVI, S. K. a AYATOLLAHI, M. R. Study on fundamental damped frequency parameters of plates made of FG porous material: a close-form solution Waves in Random and Complex Media Taylor and Francis, 2022, roč. 32, č. 6. S. neuvedeny (27 stranky). ISSN: 1745-5030. https://www.tandfonline.com/doi/full/10.1080/17455030.2022.2139010?journalCode=twrm20

RAHIMIAN KOLOOR, S. S. aj. Supersonic flutter behavior of a polymeric truncated conical shell reinforced with agglomerated CNTs Waves in Random and Complex Media TAYLOR & FRANCIS LTD, 2022 S. neuvedeny (25 stranky). ISSN: 1745-5030. https://www.tandfonline.com/doi/full/10.1080/17455030.2022.2082581?scroll=top&needAccess=true&role=tab

MUSADDAQ, A. aj. Surface wettability of vertical harps for fog collection SURFACES AND INTERFACES Elsevier, 2022, roč. 30, č. JUN. S. 1 – 10. ISSN: 2468-0230. https://www.sciencedirect.com/science/article/pii/S2468023022001237

NOMAN, M. T., AMOR, N. a PETRŮ, M. Synthesis and applications of ZnO nanostructures (ZONSs): a review CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES 1. vyd. PHILADELPHIA: Taylor and Francis, 2022, roč. 47, č. 2. S. 99 – 141. ISSN: 1040-8436. https://www.tandfonline.com/doi/abs/10.1080/10408436.2021.1886041?journalCode=bsms20

LEDERER, T. aj. Textilní nosič biomasy [užitný vzor] Zapsán 20220215 pod číslem 35793. https://isdv.upv.cz/doc/FullFiles/UtilityModels/FullDocuments/FDUM0035/uv035793.pdf

RYVOLOVÁ, M. a MAZAČ, M. The composite component with self-detection of damage EAN 2022 - 60th Annual Conference on Experimental Stress Analysis - Book of Extended Abstracts Praha: CTU Prague, 2022 S. 90 – 92. ISBN: 978-80-01-07010-9. https://www.ean60.cz/

BALRAM, D. aj. Ultrasensitive detection of food colorant sunset yellow using nickel nanoparticles promoted lettuce-like spinel Co3O4 anchored GO nanosheets Food and Chemical Toxicology PERGAMON-ELSEVIER SCIENCE LTD, 2022, roč. 159, č. JAN. S. neuvedeny (8 stran). ISSN: 0278-6915. https://www.sciencedirect.com/science/article/pii/S0278691521007584?via=ihub

HU, Q. aj. Ultrastable MOF-based foams for versatile applications NANO RESEARCH TSINGHUA UNIV PRESS, 2022, roč. 15, č. 4. S. 2961 – 2970. ISSN: 1998-0124. https://link.springer.com/article/10.1007/s12274-021-3918-6

HU, Q. aj. Unraveling timescale-dependent Fe-MOFs crystal evolution for catalytic ozonation reactivity modulation Journal of Hazardous Materials ELSEVIER, 2022, roč. 431, č. JUN. S. neuvedeny (11 stran). ISSN: 0304-3894. https://reader.elsevier.com/reader/sd/pii/S0304389422003636?token=324BF39431088D732F460685FD185085BC1AFC476C3EBC5D95EE937899242E780AB2E9E4AB738B5EAB06FAA7E9FECE86&originRegion=eu-west-1&originCreation=20230209093818

AMOR, N., NOMAN, M. T. a PETRŮ, M. Use of an Artificial Neural Network for Tensile Strength Prediction of Nano Titanium Dioxide Coated Cotton Polymers MDPI, 2022, roč. 14, č. 5. S. neuvedeny (11 stran). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/14/5/937

MAHMOOD, A. aj. Use of industrial by-products as replacement of cement for the fabrication of concrete - an approach towards sustainable structures Selected Topics in Fibrous Material Science 1. vyd. Liberec: Technical University of Liberec, 2022 S. 12 – 31. ISBN: 978-80-7494-607-3.

MLÝNEK, J., PETRŮ, M., RYVOLOVÁ, M. a RAHIMIAN KOLOOR, S. S. Winding optimization of composite frame by dry fiber rovings Journal of Industrial Textiles Thousand Oaks: SAGE Publications Ltd, 2022, roč. 52, č. July-December. S. neuvedeny (26 stranky). ISSN: 1528-0837. https://journals.sagepub.com/doi/pdf/10.1177/15280837221114639

NOMAN, M. T., PETRŮ, M., LOUDA, P. a KEJZLAR, P. Woven Textiles Coated with Zinc Oxide Nanoparticles and Their Thermophysiological Comfort Properties Journal of Natural Fibers PHILADELPHIA: TAYLOR & FRANCIS INC., 2022, roč. 19, č. 12. S. 4718 – 4730. ISSN: 1544-0478. https://www.tandfonline.com/doi/pdf/10.1080/15440478.2020.1870621

2021

YANG, T. aj. A comparison of fabric structures for carbon fiber reinforced composite: Laminated and orthogonal woven structures Polymer Composites Hoboken: Wiley, 2021, roč. 42, č. 10. S. 5300 – 5309. ISSN: 0272-8397. https://onlinelibrary.wiley.com/doi/10.1002/pc.26223

PETRŮ, M. a YANG, T. Accelerating Fe(III)/Fe(II) cycle via Fe(II) substitution for enhancing Fenton-like performance of Fe-MOFs APPLIED CATALYSIS B-ENVIRONMENTAL 1. vyd. Amsterdam: Elsevier, 2021, roč. 286, č. 6. S. neuvedeny (34 stranky). ISSN: 0926-3373. https://www.sciencedirect.com/science/article/pii/S0926337320312765?via=ihub

NOMAN, M. T. aj. Aerogels for Biomedical, Energy and Sensing Applications GELS Basel: MDPI, 2021, roč. 7, č. 4. S. neuvedeny (17 stran). ISSN: 2310-2861. https://www.mdpi.com/2310-2861/7/4/264

PETRŮ, M. a RAHIMIAN KOLOOR, S. S. An Extended Thickness-Dependent Moisture Absorption Model for Unidirectional Carbon/Epoxy Composites Polymers 1. vyd. Basel: MDPI, 2021, roč. 13, č. 3. S. neuvedeny (13 stran). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/13/3/440

PETRŮ, M. a RAHIMIAN KOLOOR, S. S. An optimum fatigue design of polymer composite CNG tank using hybrid finite element-response surface methods Polymers 1. vyd. Basel: MDPI, 2021, roč. 13, č. 4. S. neuvedeny (15 stran). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/13/4/483

YANG, T. aj. Application of Acoustical Method to Characterize Nonwoven Material Fibers and Polymers 1. vyd. Soul: Korean Fiber Society, 2021, roč. 22, č. 3. S. 831 – 840. ISSN: 1229-9197. https://link.springer.com/article/10.1007/s12221-021-9958-4

KUKAČKA, L. aj. Brightness Matching Experiments With Pulsed Light: Experiment Design IEEE Transactions on Industry Applications 1. vyd. Piscataway: Institute of Electrical and Electronics Engineers, 2021, roč. 57, č. 1. S. 1105 – 1112. ISSN: 0093-9994. https://ieeexplore.ieee.org/document/9253689

AMOR, N., NOMAN, M. T. a PETRŮ, M. Classification of Textile Polymer Composites: Recent Trends and Challenges Polymers 1. vyd. Basel: MDPI, 2021, roč. 13, č. 16. S. neuvedeny (27 stranky). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/13/16/2592

ABDELKADER, M. aj. Combined Use of Modal Analysis and Machine Learning for Materials Classification Materials 1. vyd. Basel: MDPI, 2021, roč. 14, č. 15. S. neuvedeny (15 stran). ISSN: 1996-1944. https://www.mdpi.com/1996-1944/14/15/4270/htm

RAHIMIAN KOLOOR, S. S. a PETRŮ, M. Displacement Rate Effects on the Mode II Shear Delamination Behavior of Carbon Fiber/Epoxy Composites Polymers 1. vyd. Basel: MDPI, 2021, roč. 13, č. 11. S. neuvedeny (18 stran). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/13/11/1881

PETRŮ, M. a RAHIMIAN KOLOOR, S. S. Dynamic response of aluminium sheet 2024-T3 subjected to close-range shock wave: experimental and numerical studies Journal of Materials Research and Technology 1. vyd. Amsterdam: Elsevier, 2021, roč. 10, č. 1-3. S. 349 – 362. ISSN: 2238-7854. https://www.sciencedirect.com/science/article/pii/S2238785420321062

RAHIMIAN KOLOOR, S. S. a PETRŮ, M. Effect of Alumina Additives on Mechanical and Fresh Properties of Self-Compacting Concrete: A Review Processes 1. vyd. Basel: MDPI, 2021, roč. 9, č. 3. S. 1 – 22. ISSN: 2227-9717. https://www.mdpi.com/2227-9717/9/3/554

PETRŮ, M. a BEHERA, P. K. Effect of internal mold release agent on flexural and inter laminar shear properties of carbon and glass fabric reinforced thermoset composites Polymers for Advanced Technologies 1. vyd. HOBOKEN: Wiley, 2021, roč. 32, č. 1. S. 282 – 293. ISSN: 1042-7147. https://onlinelibrary.wiley.com/doi/pdf/10.1002/pat.5084

PETRŮ, M., AMOR, N. a NOMAN, M. T. Excellent uv‐light triggered photocatalytic performance of zno.Sio2 nanocomposite for water pollutant compound methyl orange dye Nanomaterials Basel: MDPI, 2021, roč. 11, č. 10. S. neuvedeny (17 stran). ISSN: 2079-4991. https://www.mdpi.com/2079-4991/11/10/2548

PETRŮ, M. a WANG, X. Experimental study on fracture properties of CFRP-to-concrete interface subject to salt water Composite Structures 1. vyd. Oxford: Elsevier, 2021, roč. 258, č. 2. S. neuvedeny (10 stran). ISSN: 0263-8223. https://www.sciencedirect.com/science/article/pii/S0263822320331056

PETRŮ, M. a RAHIMIAN KOLOOR, S. S. Experimental Study on the Effect of Basalt Fiber and Sodium Alginate in Polymer Concrete Exposed to Elevated Temperature Processes 1. vyd. Basel: MDPI, 2021, roč. 9, č. 3. S. neuvedeny (16 stran). ISSN: 2227-9717. https://www.mdpi.com/2227-9717/9/3/510

MLÝNEK, J., RAHIMIAN KOLOOR, S. S., MARTINEC, T. a PETRŮ, M. Fabrication of High-Quality Straight-Line Polymer Composite Frame with Different Radius Parts Using Fiber Winding Process Polymers 1. vyd. Basel: MDPI, 2021, roč. 13, č. 4. S. neuvedeny (22 stranky). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/13/4/497

PETRŮ, M. a RAHIMIAN KOLOOR, S. S. First Principal Simulation Study of Human Body Compatible Molecular Single Electron Transistors IEEE Access New Jersey: IEEE, 2021, roč. 9, č. 10. S. 153548 – 153559. ISSN: 2169-3536. https://ieeexplore.ieee.org/abstract/document/9557292/authors#authors

RAHIMIAN KOLOOR, S. S. a PETRŮ, M. Fourth generation biofuel from genetically modified algal biomass: Challenges and future directions Chemosphere 1. vyd. OXFORD: Elsevier, 2021, roč. 285, č. EARLY ACCESS. S. neuvedeny (14 stran). ISSN: 0045-6535. https://www.sciencedirect.com/science/article/pii/S0045653521020075?via=ihub

MAŠÍN, I. a JANDURA, P. Funkční vzorek antivirálního kombinovaného čističe vzduchu pro komunitní a zdravotnické stany a přístřešky [funkční vzorek]

MILITKÝ, J. aj. Funkční vzorek kompozitu s hybridními nanočásticemi se zlepšenými mechanickými vlastnostmi [funkční vzorek]

PETRŮ, M. aj. Funkční vzorek nosného prvku rámové konstrukce [funkční vzorek]

MAHMOOD, A. aj. Geopolymers and Fiber-Reinforced Concrete Composites in Civil Engineering Polymers 1. vyd. Basel: MDPI, 2021, roč. 13, č. 13. S. neuvedeny (34 stranky). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/13/13/2099/htm

RAHIMIAN KOLOOR, S. S. a PETRŮ, M. Graphene Nanoparticle-Based, Nitrate Ion Sensor Characteristics Nanomaterials 1. vyd. Basel: MDPI, 2021, roč. 11, č. 1. S. neuvedeny (19 stran). ISSN: 2079-4991. https://www.mdpi.com/2079-4991/11/1/150

PETRŮ, M. a RAHIMIAN KOLOOR, S. S. Heat insulation effect in solar radiation of polyurethane powder coating nanocomposite Scientific Reports Berlin: NATURE RESEARCH, 2021, roč. 11, č. 1. S. neuvedeny (9 stran). ISSN: 2045-2322. https://www.nature.com/articles/s41598-021-00181-1

RAHIMIAN KOLOOR, S. S. a PETRÍK, S. Hybrid and Synthetic FRP Composites under Different Strain Rates: A Review Polymers MDPI, 2021, roč. 13, č. 19. S. neuvedeny (23 stranky). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/13/19/3400

BEHERA, P. K. Influence of cellulosic and non-cellulosic particle fillers on mechanical, dynamic mechanical, and thermogravimetric properties of waste cotton fibre reinforced green composites COMPOSITES PART B-ENGINEERING 1. vyd. Oxford: Elsevier, 2021, roč. 207, č. 2. S. 1 – 10. ISSN: 1359-8368. https://www.sciencedirect.com/science/article/pii/S1359836820336416?via=ihub

MALENA, V. aj. Inteligentní regulační subsystém pro ohřívače vzduchu [funkční vzorek]

RAHIMIAN KOLOOR, S. S. a PETRŮ, M. Investigation of effective geometrical parameters on wear of hot forging die Journal of Materials Research and Technology 1. vyd. Amsterdam: Elsevier, 2021, roč. 15, č. 11-12. S. 5221 – 5231. ISSN: 2238-7854. https://www.sciencedirect.com/science/article/pii/S2238785421012291

RAHIMIAN KOLOOR, S. S. a PETRŮ, M. Influence of barium addition on the formation of primary Mg2Si crystals from AleMgeSi melts Journal of Materials Research and Technology 1. vyd. Amsterdam: Elsevier, 2021, roč. 11, č. 3. S. 448 – 465. ISSN: 2238-7854. https://www.sciencedirect.com/science/article/pii/S223878542100051X

RAHIMIAN KOLOOR, S. S. a PETRŮ, M. Linear-Nonlinear Stiffness Responses of Carbon Fiber-Reinforced Polymer Composite Materials and Structures: A Numerical Study Polymers 1. vyd. Basel: MDPI, 2021, roč. 13, č. 3. S. neuvedeny (22 stranky). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/13/3/344/htm

NEJAD, A. F., RAHIMIAN KOLOOR, S. S., HAMZAH, S. M. S. A. S. a YAHYA, M. Y. Mechanical Behaviour of Pin-Reinforced Foam Core Sandwich Panels Subjected to Low Impact Loading Polymers Basel: MDPI, 2021, roč. 13, č. 21. S. neuvedeny (17 stran). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/13/21/3627

RAHIMIAN KOLOOR, S. S. a PETRŮ, M. Micro- and Nanocellulose in Polymer Composite Materials: A Review Polymers 1. vyd. Basel: MDPI, 2021, roč. 13, č. 2. S. neuvedeny (35 stranky). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/13/2/231

WANG, X. a PETRŮ, M. Modeling the dynamics behavior of flax fiber reinforced composite after water aging using a modified Huet-Sayegh viscoelastic model with fractional derivatives Construction and Building Materials 1. vyd. Amsterdam: Elsevier, 2021, roč. 290, č. 8. S. neuvedeny (6 stran). ISSN: 0950-0618. https://www.sciencedirect.com/science/article/pii/S0950061821006395?via=ihub

PETRŮ, M. a RAHIMIAN KOLOOR, S. S. Monolayer Twisted Graphene-Based Schottky Transistor Materials Basel: MDPI, 2021, roč. 14, č. 15. S. 1 – 11. ISSN: 1996-1944. https://www.mdpi.com/1996-1944/14/15/4109/htm

ALI, A. aj. Multifunctional electrically conductive copper electroplated fabrics sensitizes by in-situ deposition of copper and silver nanoparticles Nanomaterials Basel: MDPI, 2021, roč. 11, č. 11. S. neuvedeny (24 stranky). ISSN: 2079-4991. https://www.mdpi.com/2079-4991/11/11/3097

AMOR, N., NOMAN, M. T., PETRŮ, M. a MAHMOOD, A. Neural network-crow search model for the prediction of functional properties of nano TiO2 coated cotton composites Scientific Reports 1. vyd. Berlin: NATURE RESEARCH, 2021, roč. 11, č. 1. S. neuvedeny (13 stran). ISSN: 2045-2322. https://www.nature.com/articles/s41598-021-93108-9.pdf

NOMAN, M. T. aj. Photocatalytic Behaviour of Zinc Oxide Nanostructures on Surface Activation of Polymeric Fibres Polymers 1. vyd. Basel: MDPI, 2021, roč. 13, č. 8. S. neuvedeny (18 stran). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/13/8/1227

AMOR, N., NOMAN, M. T. a PETRŮ, M. Prediction of functional properties of nano TiO2 coated cotton composites by artificial neural network Scientific Reports 1. vyd. Berlin: NATURE RESEARCH, 2021, roč. 11, č. 1. S. neuvedeny (11 stran). ISSN: 2045-2322. https://www.nature.com/articles/s41598-021-91733-y

AMOR, N., NOMAN, M. T. a PETRŮ, M. Prediction of methylene blue removal by nano TiO2 using deep neural network Polymers Basel: MDPI, 2021, roč. 13, č. 18. S. neuvedeny (12 stran). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/13/18/3104

PETRŮ, M. a RAHIMIAN KOLOOR, S. S. Representative Cell Analysis for Damage-Based Failure Model of Polymer Hexagonal Honeycomb Structure under the Out-of-Plane Loadings Polymers 1. vyd. Basel: MDPI, 2021, roč. 13, č. 1. S. neuvedeny (23 stranky). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/13/1/52

PETRŮ, M. a RAHIMIAN KOLOOR, S. S. Role B4C Addition on Microstructure, Mechanical, and Wear Characteristics of Al-20% Mg2Si Hybrid Metal Matrix Composite Applied Sciences 1. vyd. MDPI AG, 2021, roč. 11, č. 7. S. neuvedeny (22 stranky). ISSN: 2076-3417. https://www.mdpi.com/2076-3417/11/7/3047/pdf

PETRŮ, M. a RAHIMIAN KOLOOR, S. S. Separation of ctDNA by Superparamagnetic Bead Particles in Microfluidic Platform for Early Cancer Detection JOURNAL OF ADVANCED RESEARCH 1. vyd. Amsterdam: Elsevier, 2021, roč. 33, č. NOV. S. 109 – 116. ISSN: 2090-1232. https://www.sciencedirect.com/science/article/pii/S2090123221000369?via=ihub

MILITKÝ, J. aj. Single-Step Green Synthesis of Highly Concentrated and Stable Colloidal Dispersion of Core-Shell Silver Nanoparticles and Their Antimicrobial and Ultra-High Catalytic Properties Nanomaterials BASEL: Mdpi, 2021, roč. 11, č. 4. S. neuvedeny (14 stran). ISBN: 978-80-270-8323-7, ISSN: 2079-4991. https://www.mdpi.com/2079-4991/11/4/1007

PETRŮ, M. a RAHIMIAN KOLOOR, S. S. Strength and flexural behavior of steel fiber and silica fume incorporated self-compacting concrete Journal of Materials Research and Technology 1. vyd. Amsterdam: Elsevier, 2021, roč. 12, č. 6. S. 1380 – 1390. ISSN: 2238-7854. https://www.sciencedirect.com/science/article/pii/S2238785421002933

RAHIMIAN KOLOOR, S. S. a PETRŮ, M. Temperature Impact on Engineered Cementitious Composite Containing Basalt Fibers Applied Sciences 1. vyd. Basel: MDPI, 2021, roč. 11, č. 15. S. neuvedeny (15 stran). ISSN: 2076-3417. https://www.mdpi.com/2076-3417/11/15/6848

YANG, K. aj. Thermal Analysis of PEG/Metal Particle-coated Viscose Fabric Polymer Testing 1. vyd. OXFORD: Elsevier, 2021, roč. 100, č. AUG. S. neuvedeny (14 stran). ISSN: 0142-9418. https://www.sciencedirect.com/science/article/pii/S0142941821001811

XIONG, X. aj. Thermal Behavior of Aerogel-Embedded Nonwovens in Cross Airflow Autex Research Journal 1. vyd. LODZ: AUTEX, 2021, roč. 21, č. 1. S. 115 – 124. ISSN: 1470-9589. https://www.researchgate.net/publication/339502155_Thermal_Behavior_of_Aerogel-Embedded_Nonwovens_in_Cross_Airflow

RAHIMIAN KOLOOR, S. S. a PETRŮ, M. Thermal Delamination Modelling and Evaluation of Aluminium–Glass Fibre-Reinforced Polymer Hybrid Polymers 1. vyd. Basel: MDPI, 2021, roč. 13, č. 4. S. neuvedeny (19 stran). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/13/4/492

WANG, Y. aj. Utility of whiskerized carbon fabric surfaces in resistive heating of composites Polymer Composites Hoboken: Wiley, 2021, roč. 42, č. 6. S. 2774 – 2786. ISSN: 0272-8397. https://doi.org/10.1002/pc.26012

2020

PETRŮ, M. a RAHIMIAN KOLOOR, S. S. A Comparative Study of the Data-Driven Stochastic Subspace Methods for Health Monitoring of Structures: A Bridge Case Study Applied Sciences 1. vyd. Basel: MDPI, 2020, roč. 10, č. 9. S. 1 – 18. ISSN: 2076-3417. https://www.mdpi.com/2076-3417/10/9/3132

RAHIMIAN KOLOOR, S. S. a PETRŮ, M. A Review on Vehicle Classification and Potential Use of Smart Vehicle-Assisted Techniques Sensors 1. vyd. Basel: MDPI, 2020, roč. 20, č. 11. S. neuvedeny (29 stranky). ISSN: 1424-8220. https://www.mdpi.com/1424-8220/20/11/3274

RAHIMIAN KOLOOR, S. S. a PETRŮ, M. An Analytical Conductance Model for Gas Detection Based on a Zigzag Carbon Nanotube Sensor Sensors 1. vyd. Basel: MDPI, 2020, roč. 20, č. 2. S. neuvedeny (12 stran). ISSN: 1424-8220. https://www.mdpi.com/1424-8220/20/2/357

RAHIMIAN KOLOOR, S. S. a PETRŮ, M. An Energy-Based Concept for Yielding of Multidirectional FRP Composite Structures Using a Mesoscale Lamina Damage Model Polymers 1. vyd. Basel: MDPI, 2020, roč. 12, č. 1. S. neuvedeny (18 stran). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/12/1/157

RAHIMIAN KOLOOR, S. S. a PETRŮ, M. Analytical Approach to Study Sensing Properties of Graphene Based Gas Sensor Sensors 1. vyd. Basel: MDPI, 2020, roč. 20, č. 5. S. neuvedeny (14 stran). ISSN: 1424-8220. https://www.mdpi.com/1424-8220/20/5/1506

PETRŮ, M. a RAHIMIAN KOLOOR, S. S. Analytical Prediction of Highly Sensitive CNT-FET-Based Sensor Performance for Detection of Gas Molecules IEEE Access 1. vyd. New Jersey: IEEE, 2020, roč. 8, č. 1. S. 12655 – 12661. ISSN: 2169-3536. https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8955777

RAHIMIAN KOLOOR, S. S. a PETRŮ, M. Application of the Subspace-Based Methods in Health Monitoring of Civil Structures: A Systematic Review and Meta-Analysis Applied Sciences 1. vyd. Basel: MDPI, 2020, roč. 10, č. 10. S. neuvedeny (38 stranky). ISSN: 2076-3417. https://www.mdpi.com/2076-3417/10/10/3607

RYVOLOVÁ, M. a VOSÁHLO, J. Basalt reinforced plastic-development and modeling of part Material Science Forum 1. vyd. Trans Tech Publications Ltd, 2020, roč. 994, č. 2020. S. 115 – 124. ISSN: 0255-5476. https://www.scientific.net/MSF.994.115

RAHIMIAN KOLOOR, S. S. a PETRŮ, M. Carbon Nanoparticle-Based Electro-Thermal Building Block Applied Sciences 1. vyd. Basel: MDPI, 2020, roč. 10, č. 15. S. neuvedeny (10 stran). ISSN: 2076-3417. https://www.mdpi.com/2076-3417/10/15/5117?type=check_update&version=1

RAHIMIAN KOLOOR, S. S. a PETRŮ, M. Carbon-based Band Gap Engineering in the h-BN Analytical Modeling Materials 1. vyd. Basel: MDPI, 2020, roč. 13, č. 5. S. neuvedeny (10 stran). ISSN: 1996-1944. https://www.mdpi.com/1996-1944/13/5/1026

YANG, T., PETRŮ, M., XIONG, X. a MILITKÝ, J. Characterization on Polyester Fibrous Panels and Their Homogeneity Assessment Polymers 1. vyd. Basel: MDPI, 2020, roč. 12, č. 9. S. neuvedeny (13 stran). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/12/9/2098

HU, S. aj. Copper coated textiles for inhibition of virus spread Textile Bioengineering and Informatics Symposium Proceedings 2020 - 13th Textile Bioengineering and Informatics 1. vyd. Manchester: TBIS, 2020 S. 84 – 91. ISSN: 1942-3438. https://search.bvsalud.org/global-literature-on-novel-coronavirus-2019-ncov/resource/en/covidwho-908473

PETRŮ, M. a RAHIMIAN KOLOOR, S. S. Coulomb Blockade Effect in Well-Arranged 2D Arrays of Palladium Nano-Islands for Hydrogen Detection at Room Temperature: A Modeling Study Nanomaterials 1. vyd. Basel: MDPI, 2020, roč. 10, č. 5. S. neuvedeny (12 stran). ISSN: 2079-4991. https://www.mdpi.com/2079-4991/10/5/835

WANG, X. a PETRŮ, M. Degradation of bending properties of flax fiber reinforced polymer after natural aging and accelerated aging Construction and Building Materials 1. vyd. Oxford: Elsevier, 2020, roč. 240, č. 4. S. neuvedeny (7 stran). ISSN: 0950-0618. https://www.sciencedirect.com/science/article/abs/pii/S0950061819333628?via=ihub

PENG, Q. aj. Dendrimer-grafted PLGA nanofibrous matrix-mediated gene delivery systems Textile Bioengineering and Informatics Symposium Proceedings 2020 - 13th Textile Bioengineering and Informatics Symposium, TBIS 2020 1. vyd. Manchester: TBIS, 2020 S. 152 – 158. ISSN: 1942-3438.

RYVOLOVÁ, M. a VOSÁHLO, J. Determination of Mechanical Properties of FRP by Bending Test Lecture Notes in Mechanical Engineering 1. vyd. Switzerland: Springer International Publishing, 2020 S. 581 – 587. ISBN: 978-303033145-0, ISSN: 2195-4356. https://link.springer.com/chapter/10.1007/978-3-030-33146-7_66

WANG, Y. aj. Disinfection mechanisms of UV light and ozonization Textile Bioengineering and Informatics Symposium Proceedings 2020 - 13th Textile Bioengineering and Informatics 1. vyd. Manchester: TBIS, 2020 S. 173 – 180. ISSN: 1942-3438. https://search.bvsalud.org/global-literature-on-novel-coronavirus-2019-ncov/resource/en/covidwho-908483

SRB, P. a RYVOLOVÁ, M. Dynamic Analysis of Carbon Woven Reinforced Epoxy Matrix Composites Used for Parts of Electric Vehicles Experimental Stress Analysis - 58th International Scientific Conference, EAN 2020 1. vyd. Ostrava: Vysoká škola báňská - Technická Univerzita Ostrava, 2020 S. 471 – 475. ISBN: 978-802484451-0.

NOMAN, M. T. a PETRŮ, M. Effect of Sonication and Nano TiO2 on Thermophysiological Comfort Properties of Woven Fabrics ACS Omega 1. vyd. WASHINGTON: American Chemical Society, 2020, roč. 5, č. 20. S. 11481 – 11490. ISSN: 2470-1343. https://pubs.acs.org/doi/10.1021/acsomega.0c00572

RAHIMIAN KOLOOR, S. S. Effects of cell aspect ratio and relative density on deformation response and failure of honeycomb core structure Materials Research Express 1. vyd. Bristol: IOP Publishing, 2020, roč. 7, č. 1. S. neuvedeny (17 stran). ISSN: 2053-1591. https://iopscience.iop.org/article/10.1088/2053-1591/ab6926/pdf

WANG, Y. aj. Electrical Heating Properties of Various Carbonized Textile Structures Textile Bioengineering and Informatics Symposium Proceedings 2020 - 13th Textile Bioengineering and Informatics Symposium, TBIS 2020 1. vyd. TBIS, 2020 S. 99 – 106. ISBN: 978-1-71381-855-7, ISSN: 1942-3438.

BEHERA, P. K., NOMAN, M. T. a PETRŮ, M. Enhanced Mechanical Properties of Eucalyptus-Basalt-Based Hybrid-Reinforced Cement Composites Polymers 1. vyd. Basel: MDPI, 2020, roč. 12, č. 12. S. neuvedeny (15 stran). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/12/12/2837

PETRŮ, M. a RAHIMIAN KOLOOR, S. S. Estimation of Critical Dimensions for the Crack and Pitting Corrosion Defects in the Oil Storage Tank Using Finite Element Method and Taguchi Approach Metals 1. vyd. Basel: MDPI, 2020, roč. 10, č. 10. S. neuvedeny (15 stran). ISSN: 2075-4701. https://www.mdpi.com/2075-4701/10/10/1372

PETRŮ, M. a RAHIMIAN KOLOOR, S. S. Experimental and Numerical Analysis of Fatigue Life of Aluminum Al 2024-T351 at Elevated Temperature Metals 1. vyd. Basel: MDPI, 2020, roč. 10, č. 12. S. neuvedeny (14 stran). ISSN: 2075-4701. https://www.mdpi.com/2075-4701/10/12/1581

MLÝNEK, J., PETRŮ, M., MARTINEC, T. a RAHIMIAN KOLOOR, S. S. Fabrication of High-Quality Polymer Composite Frame by a New Method of Fiber Winding Process Polymers 1. vyd. Basel: MDPI, 2020, roč. 12, č. 5. S. neuvedeny (30 stranky). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/12/5/1037

RAHIMIAN KOLOOR, S. S. a PETRŮ, M. Failure of glass fibre-reinforced polypropylene metal laminate subjected to close-range explosion Polymers 1. vyd. Basel: MDPI, 2020, roč. 12, č. 9. S. neuvedeny (14 stran). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/12/9/2139

NOMAN, M. T. a PETRŮ, M. Functional Properties of Sonochemically Synthesized Zinc Oxide Nanoparticles and Cotton Composites Nanomaterials 1. vyd. Basel: MDPI, 2020, roč. 10, č. 9. S. neuvedeny (14 stran). ISSN: 2079-4991. https://www.mdpi.com/2079-4991/10/9/1661

RAHIMIAN KOLOOR, S. S. a PETRŮ, M. Health Monitoring of Civil Infrastructures by Subspace System Identification Method: An Overview Applied Sciences 1. vyd. Basel: MDPI, 2020, roč. 10, č. 8. S. neuvedeny (29 stranky). ISSN: 2076-3417. https://www.mdpi.com/2076-3417/10/8/2786/htm

PETRŮ, M. a RAHIMIAN KOLOOR, S. S. Improving ‘Lipid Productivity’ in Microalgae by Bilateral Enhancement of Biomass and Lipid Contents: A Review Sustainability 1. vyd. Basel: MDPI, 2020, roč. 12, č. 21. S. neuvedeny (28 stranky). ISSN: 2071-1050. https://www.mdpi.com/2071-1050/12/21/9083

PETRŮ, M. a RAHIMIAN KOLOOR, S. S. Investigation on the Curvature Correction Factor of Extension Spring Materials 1. vyd. Basel: MDPI, 2020, roč. 13, č. 18. S. neuvedeny (14 stran). ISSN: 1996-1944. https://www.mdpi.com/1996-1944/13/18/4199/htm

RAHIMIAN KOLOOR, S. S. a PETRŮ, M. Isolation and Characterization of a Novel Bacterium from the Marine Environment for Trichloroacetic Acid Bioremediation Applied Sciences 1. vyd. Basel: MDPI, 2020, roč. 10, č. 13. S. neuvedeny (17 stran). ISSN: 2076-3417. https://www.mdpi.com/2076-3417/10/13/4593

SIERATOVSKI, J. aj. Lamella for Fireproof Gates And a Fireproof Gate Comprising These Lamellas [patent] Udělen 20200708 pod číslem EP3511510 B1. https://worldwide.espacenet.com/publicationDetails/biblio?II=0&ND=3&adjacent=true&locale=en_EP&FT=D&date=20190717&CC=EP&NR=3511510A1&KC=A1

BERAN, J. aj. Linka na výrobu plošného kompozitního materiálu s obsahem nanovláken [funkční vzorek]

BERAN, J. aj. Linka na výrobu plošných kompozitních nanovlákenných materiálů s využitím AC elektrospinningu. Výzkumná zpráva dílčího projektu TN01000015 NCK za rok 2020, 2020

PETRŮ, M. a RAHIMIAN KOLOOR, S. S. Mechanical Characterization of Heterogeneous Polycrystalline Rocks Using Nanoindentation Method in Combination with Generalized Means Method Journal of Mechanics 1. vyd. Cambridge: Cambridge University Press, 2020, roč. 36, č. 2. S. 813 – 823. ISSN: 1727-7191. https://www.cambridge.org/core/journals/journal-of-mechanics/article/mechanical-characterization-of-heterogeneous-polycrystalline-rocks-using-nanoindentation-method-in-combination-with-generalized-means-method/A182BB7B339C6C36D589A36BCE7E4A83

WANG, X. a PETRŮ, M. Mode I fracture evaluation of carbon fiber reinforced polymer/steel interfaces subject to freeze-thaw cycling Engineering Failure Analysis 1. vyd. Oxford: Elsevier, 2020, roč. 110, č. 3. S. neuvedeny (17 stran). ISSN: 1350-6307. https://www.sciencedirect.com/science/article/pii/S1350630719308386

RAHIMIAN KOLOOR, S. S. a PETRŮ, M. Moisture absorption effects on mode II delamination of carbon/epoxy composites Polymers 1. vyd. Basel: MDPI, 2020, roč. 12, č. 9. S. neuvedeny (13 stran). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/12/9/2162

MANSOOR, T., HES, L., BAJZÍK, V. a NOMAN, M. T. Novel method on thermal resistance prediction and thermo-physiological comfort of socks in a wet state Textile Research Journal 1. vyd. LONDON, ENGLAND: SAGE PUBLICATIONS LTD, 2020, roč. 90, č. 17-18. S. 1987 – 2006. ISSN: 0040-5175. https://journals.sagepub.com/doi/full/10.1177/0040517520902540

WANG, X. a PETRŮ, M. Numerical investigation for the fatigue performance of reinforced concrete beams strengthened with external prestressed HFRP sheet Construction and Building Materials 1. vyd. Oxford: Elsevier, 2020, roč. 237, č. 3. S. neuvedeny (15 stran). ISSN: 0950-0618. https://www.sciencedirect.com/science/article/abs/pii/S0950061819330533#!

PETRŮ, M. a RAHIMIAN KOLOOR, S. S. Numerical Prediction of Residual Stresses Distribution in Thin-Walled Press-Braked Stainless Steel Sections Materials 1. vyd. Basel: MDPI, 2020, roč. 13, č. 23. S. 1 – 31. ISSN: 1996-1944. https://www.mdpi.com/1996-1944/13/23/5378

RAHIMIAN KOLOOR, S. S. a PETRŮ, M. On the Performance of Small-Scale Horizontal Axis Tidal Current Turbines. Part 1: One Single Turbine Sustainability 1. vyd. Basel: MDPI, 2020, roč. 12, č. 15. S. neuvedeny (23 stranky). ISSN: 2071-1050. https://www.mdpi.com/2071-1050/12/15/5985

NOMAN, M. T., PETRŮ, M., MILITKÝ, J. a MUSADDAQ, A. One-Pot Sonochemical Synthesis of ZnO Nanoparticles for Photocatalytic Applications, Modelling and Optimization Materials 1. vyd. Basel: MDPI, 2020, roč. 13, č. 1. S. neuvedeny (19 stran). ISSN: 1996-1944. https://www.mdpi.com/1996-1944/13/1/14

RAHIMIAN KOLOOR, S. S. a PETRŮ, M. Optimum Design of Sunken Reinforced Enclosures under Buckling Condition Applied Sciences 1. vyd. Basel: MDPI, 2020, roč. 10, č. 23. S. neuvedeny (14 stran). ISSN: 2076-3417. https://www.mdpi.com/2076-3417/10/23/8449

PETRŮ, M. a RAHIMIAN KOLOOR, S. S. Performance improvement of a new proposed Savonius hydrokinetic turbine: a numerical investigation Energy Reports 1. vyd. Oxford: Elsevier, 2020, roč. 6, č. 11. S. 3051 – 3066. ISSN: 2352-4847. https://www.sciencedirect.com/science/article/pii/S2352484720314335?via=ihub

YANG, T. a PETRŮ, M. Porous Film Coating Enabled by Polyvinyl Pyrrolidone (PVP) for Enhanced Air Permeability of Fabrics: The Effect of PVP Molecule Weight and Dosage Polymers 1. vyd. Basel: MDPI, 2020, roč. 12, č. 12. S. neuvedeny (12 stran). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/12/12/2961

PETRŮ, M. a VOSÁHLO, J. Principles of Increasing the Winding Effectivity of Composite Prepregs to Construction Application Lecture Notes in Mechanical Engineering - Current Methods of Construction Design 1. vyd. Switzerland: Springer International Publishing, 2020 S. 557 – 564. ISBN: 978-3-030-33145-0, ISSN: 2195-4356. https://www.springer.com/gp/book/9783030331450

PETRŮ, M. aj. Prototyp odlehčené palety s kompozitními prvky za účelem snižování hmotnosti a redukce uhlíkové stopy vlivem přepravy [funkční vzorek]

YANG, T. aj. Sound Absorption Properties of Natural Fibers: A Review Sustainability 1. vyd. Basel: MDPI, 2020, roč. 12, č. 20. S. neuvedeny (27 stranky). ISSN: 2071-1050. https://www.mdpi.com/2071-1050/12/20/8477

MUSADDAQ, A. aj. Structural design of efficient fog collectors: A review Environmental Technology & Innovation 1. vyd. Oxford: Elsevier, 2020, roč. 20, č. 11. S. neuvedeny (17 stran). ISSN: 2352-1864. https://www.sciencedirect.com/science/article/pii/S2352186420314693

RYVOLOVÁ, M., ŠKODOVÁ, M., LOUDA, P. a VOLESKÝ, L. Studium degradace skleněných vláken v zásaditém prostředí pomocí zobrazovacích metod Jemná mechanika a optika olomouc: FZU AV ČR, 2020 S. 98 – 102. ISSN: 0447-6441. https://jmo.fzu.cz/sites/jmo.fzu.cz/files/oldweb/2020/2020-04/jmo_20_04_obsah.pdf

PETRŮ, M. aj. Technologie pro efektivní výrobu plastových obalů [ověřená technologie]. 2020.

TAN, X. aj. The effect of electrode materials and ultrasound on electrochemical reduction Textile Bioengineering and Informatics Symposium Proceedings 2020 - 13th Textile Bioengineering and Informatics Symposium, TBIS 2020 1. vyd. Manchester: TBIS, 2020 S. 554 – 560. ISSN: 1942-3438.

RAHIMIAN KOLOOR, S. S. a PETRŮ, M. The effect of lateral load type on shear lag of concrete tubular structures with different plan geometries Crystals 1. vyd. Basel: MDPI, 2020, roč. 10, č. 10. S. neuvedeny (15 stran). ISSN: 2073-4352. https://www.mdpi.com/2073-4352/10/10/897/htm

MAZAČ, M. a MALÝ, M. The Gearing Temperature Shock Oscillation Lecture Notes in Mechanical Engineering, Current Methods of Construction Design 1. vyd. Springer Nature Switzerland AG: Springer International Publishing, 2020 S. 113 – 119. ISBN: 978-303033145-0, ISSN: 2195-4356. https://www.springer.com/gp/book/9783030331450

YANG, T. aj. Theoretical and Experimental Studies on Thermal Properties of Polyester Nonwoven Fibrous Material Materials 1. vyd. Basel: MDPI, 2020, roč. 13, č. 12. S. neuvedeny (20 stran). ISSN: 1996-1944. https://www.mdpi.com/1996-1944/13/12/2882

YANG, K. aj. Thermal performance of a multi-layer composite containing peg/laponite as pcms Journal of Fiber Bioengineering and Informatics 1. vyd. Global Science Press, 2020, roč. 13, č. 2. S. 61 – 68. ISSN: 1940-8676. https://global-sci.org/intro/article_detail/jfbi/17880.html

PETRŮ, M. a RAHIMIAN KOLOOR, S. S. Thermal Performance of Alginate Concrete Reinforced with Basalt Fiber Crystals 1. vyd. Basel: MDPI, 2020, roč. 10, č. 9. S. neuvedeny (15 stran). ISSN: 2073-4352. https://www.mdpi.com/2073-4352/10/9/779

NOMAN, M. T. aj. Thermophysiological comfort of sonochemically synthesized nano TiO2 coated woven fabrics Scientific Reports 1. vyd. London: NATURE PUBLISHING GROUP, 2020, roč. 10, č. 1. S. neuvedeny (12 stran). ISSN: 2045-2322. https://www.nature.com/articles/s41598-020-74357-6

NOMAN, M. T., PETRŮ, M., AMOR, N. a LOUDA, P. Thermophysiological comfort of zinc oxide nanoparticles coated woven fabrics Scientific Reports 1. vyd. Berlin: NATURE RESEARCH, 2020, roč. 10, č. 1. S. 1 – 12. ISSN: 2045-2322. https://www.nature.com/articles/s41598-020-78305-2

XIONG, X. aj. Transport properties of electro-sprayed polytetrafluoroethylene fibrous layer filled with aerogels/phase change materials Nanomaterials 1. vyd. Switzerland: MDPI, 2020, roč. 10, č. 10. S. neuvedeny (4 stranky). ISSN: 2079-4991. https://www.mdpi.com/2079-4991/10/10/2042

RAHIMIAN KOLOOR, S. S. a PETRŮ, M. Using Finite Element Approach for Crashworthiness Assessment of a Polymeric Auxetic Structure Subjected to the Axial Loading Polymers 1. vyd. Basel: MDPI, 2020, roč. 12, č. 6. S. neuvedeny (15 stran). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/12/6/1312

RAHIMIAN KOLOOR, S. S. a PETRŮ, M. Vehicle-Assisted Techniques for Health Monitoring of Bridges Sensors 1. vyd. Basel: MDPI, 2020, roč. 20, č. 12. S. neuvedeny (29 stranky). ISSN: 1424-8220. http://doi.org/10.3390/s20123460

KRČMAŘÍK, D. aj. Zařízení pro napájení elektroniky internetu věcí na zemědělském stroji [užitný vzor] Zapsán 20200901 pod číslem 34350. https://isdv.upv.cz/doc/FullFiles/UtilityModels/FullDocuments/FDUM0034/uv034350.pdf

2019

KARTHIK, D. aj. Effect of particulate fillers on creep behaviour of epoxy composites Materials Today: Proceedings 1. vyd. Oxford: Elsevier, 2019 S. 217 – 220. ISSN: 2214-7853. https://www.sciencedirect.com/science/article/pii/S2214785319337472#!

VENKATARAMAN, M. aj. Sophisticated Glass Tapes for Fabrication of Composites Journal of Fiber Bioengineering and Informatics 1. vyd. Global Science Press, 2019, roč. 12, č. 1. S. 35 – 42. ISSN: 1940-8676. http://journal10.magtechjournal.com/Jwk_JoFBaI/EN/Y2019/V12/I1/35#